Models > 72163659300

72163659300 Kenmore Microwave - Overview

Get Parts and Repair Help for 72163659300

If you know the microwave repair part you need, you can browse the list of all parts on the 72163659300, or you can search by name or part description. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.59

Cover,Lamp

$3.06

Light Bulb - 125V 30W

$3.06

Switch,Micro

$1.96

Screw,Tapping

$15.41

Filter,Grease

$15.41

Tray,Glass

$20.11

HANDLE,DOOR

$1.96

Connector Assembly

$3.06

Switch,Micro

$3.06

Shaft,Turntable

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the handle broke in half

  • Customer: Garth from Albuquerque NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 7 people found this instruction helpful
With the amount of force needed to open the microwave door I can see this repair repeated. Some of the handle was still attached to the door so I could open it easy enough. there is a flamge covering the scerws to remove the handle. using a small flat blade screw driver aids in the removal of the flange to expose the screws. the square flange surrounds the ... read more

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

tab was broken off when changing bulb

  • Customer: Shawn from Seattle WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed old cover to lamp and reinstalled the new one by unscrewing one screw and screwing the new one back in read more