Models > 72163359300

72163359300 Kenmore Microwave - Overview

Get Parts and Repair Help for 72163359300

If you know the microwave repair part you need, you can browse the list of all parts on the 72163359300, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.09

Switch,Micro

Order within the next 11 hrs and your part ships today!
$22.89

Motor, AC Synchronous

Order within the next 11 hrs and your part ships today!
$1.96

Spring

Order within the next 11 hrs and your part ships today!
$3.12

Switch,Micro

Order within the next 11 hrs and your part ships today!
$1.96

Fuse,Time Delay

Order within the next 11 hrs and your part ships today!
$1.96

Screw,Tapping

Order within the next 11 hrs and your part ships today!
$6.34

Lever

Order within the next 11 hrs and your part ships today!
$1.96

Spring

Order within the next 11 hrs and your part ships today!
$1.96

Cap,Base Plate

Order within the next 11 hrs and your part ships today!
$74.68

Magnetron

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

Carousel would not turn. Small plastic drive shaft broken.

  • Customer: Stan from New Bedford MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Pried cover off bottom-center of microwave. It seems to be either glued or lightly tack welded. Removed 2 small Phillips screws to remove motor. Disconnected electric feed by hand. Don't let go of electric wire or small screws. They will be hard to retrieve from behind the rest of the metal base. Reverse process to install new motor. Didn't try to put small ... read more

Microwave operated but did not heat

  • Customer: Donald from Oak Ridge TN
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Initial failure of over range microwave Aug 3rd. Control Panel worked but no heat. Took to local LG authoriaed local repair place. They fixed it quickly and we re-installed it. Worked fine for 2 months then had similar failure again. Agaim took to same authorized repairer. They kept unit for 3 months but finally concluded theu could not fix it and suggeste... read more