Models > 72162369200

72162369200 Kenmore Microwave - Overview

Get Parts and Repair Help for 72162369200

If you know the microwave repair part you need, you can browse the list of all parts on the 72162369200, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.05

Switch,Micro

$12.93

Motor, AC Synchronous

$1.95

Fuse,Time Delay

$6.34

Turntable Assembly

$1.95

Cover,Resin

$47.37

Tray,Glass

$4.59

Lamp,Incandescent

PCB Assembly,Sub

$22.86

Sensor Assembly

$1.95

Locker

Common Symptoms of the 72162369200 [Viewing 1 of 23]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

MOTOR BURNED OUT ON TURNTABLE

  • Customer: Steven from Oak Forest IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 20 of 27 people found this instruction helpful
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a Tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No trip to Home Depot today. read more

Carousel would not turn. Small plastic drive shaft broken.

  • Customer: Stan from New Bedford MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Pried cover off bottom-center of microwave. It seems to be either glued or lightly tack welded. Removed 2 small Phillips screws to remove motor. Disconnected electric feed by hand. Don't let go of electric wire or small screws. They will be hard to retrieve from behind the rest of the metal base. Reverse process to install new motor. Didn't try to put small ... read more

Microwave operated but did not heat

  • Customer: Donald from Oak Ridge TN
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Initial failure of over range microwave Aug 3rd. Control Panel worked but no heat. Took to local LG authoriaed local repair place. They fixed it quickly and we re-installed it. Worked fine for 2 months then had similar failure again. Agaim took to same authorized repairer. They kept unit for 3 months but finally concluded theu could not fix it and suggeste... read more