Models
>
72103
72103 Toro Lawn Tractor - Overview
Models starting with 72103
Click on the best match to narrow your results.
- 72103 (5900601-5999999 - 1995) Toro Lawn Tractor (Lawn Tractor)
- 72103 (5900001-5900600 - 1995) Toro Lawn Tractor (Lawn Tractor)
- 72103 (4900001-4999999 - 1994) Toro Lawn Tractor (Lawn Tractor)
- 72103 ( 4900001 - 4999999 ) Toro Lawn Tractor (268-H Yard Tractor)
- 72103 ( 5900001 - 5900600 ) Toro Lawn Tractor (268-H Yard Tractor)
- 72103 ( 5900601 - 5999999 ) Toro Lawn Tractor (268-H Yard Tractor)
Exact Part matches for your search term
[Viewing 2 of 2]
Control wire
This part number matches the current model number 72103
PartSelect #: PS16579802
Manufacturer #: 72103
No Longer Available
SVC-AQUA STOP SAFETY SYSTEM;72103,IDW24
This part number matches the current model number 72103
PartSelect #: PS16626808
Manufacturer #: DD81-03701A
$181.16
Special Order
Keep searches simple, eg. "belt" or "pump".
Nut-Lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$3.99
In Stock
Nut-Lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$3.99
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
Parts Used:
-
Dana from HAMMOND, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stop working and leaking air from top.
-
gilberto from TAMPA, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench set
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!