Models > 6AMTW5855TQ0 > Parts

6AMTW5855TQ0 Maytag Washer - Parts

All parts for the Maytag Washer 6AMTW5855TQ0

Below is a list of all parts for the Maytag Washer 6AMTW5855TQ0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 6AMTW5855TQ0
1-14 of 202
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Suspension Spring

Sold Individually. Appliance takes 3 of this part.


Clutch Assembly

A worn clutch can cause a slower spin speed which will leave your clothes wet after a cycle. This clutch assembly comes with brake cam driver, blue spring for large capacity washers and black spring for compact washers. As per factory, the green spring (1.24") replaces the black spring (1.46").


Lid Switch

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the grounding wire.


Tub Spring

This part is used to balance the tub during spin cycle. Sold individually. It is recommended that you replace all 3 at the same time.


Agitator Bolt

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".


Tub Wear Pads - Package of 3

This package of pads contains three brown tub wear pads.


Foot, Front - Single

Sold Individually.


Hose Clamp



This screw is sold individually.


Leveling Spring

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.


Drain Hose

This drain hose is 42" long and includes the clamps.



This part goes on the agitator retaining bolt.


Lid Hinge Mounting Screw

Sold individually.


Touch-Up Paint - White


All Parts for the 6AMTW5855TQ0
1-14 of 202