Models > 666WJ ESVW

666WJ-ESVW Admiral Range - Overview

Get Parts and Repair Help for 666WJ-ESVW

If you know the range repair part you need, you can browse the list of all parts on the 666WJ-ESVW, or you can search by name or part description. You can also find your part by where it is located on the 666WJ-ESVW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 666WJ-ESVW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 666WJ-ESVW [Viewing 4 of 4]

$2.52

Light Bulb - 40W

Sold individually.

$18.07

2 Piece Broiler Pan

$6.04

Oven Door Spring

Sold individually.

$39.40

Bake Element

This spade style bake element has push on wire terminals. It is found on the bottom of the oven.

$17.88

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$2.77

Screw - sold individually

$2.70

Screw

This screw is sold individually.

$60.64

Surface Element Kit with Limiter - 6"

This ceramic element kit comes with an overheat limit switch, two wires, and two wire connectors.

$3.96

Lamp Retainer Gasket

$113.75

Burner Element with Limit Switch - 8"

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inner Oven Glass broken

  • Customer: David from Wayne NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 18 of 23 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

replaced heating element on flat surface stove top

  • Customer: dennis from assonet MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 16 of 23 people found this instruction helpful
I removed 4 screws and then lifted up the top it gave me access to the element I followed the direction that came with the element (very clear to follow) removed and installed the new element and it worked fine. Remember to unplug the stove if it is electric this is not in the instructions. read more

Element burned out

  • Customer: Anita from Hudson CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 23 people found this instruction helpful
Unplug Stove removed screws pulled out
element. Lifted off the wires with a pliers they slid
onto the element ends that were pointed up
was very easy. read more