Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 666WJ-ESAW

666WJ-ESAW Admiral Range - Overview

Get Parts and Repair Help for 666WJ-ESAW

If you know the range repair part you need, you can browse the list of all parts on the 666WJ-ESAW, or you can search by name or part description. You can also find your part by where it is located on the 666WJ-ESAW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 666WJ-ESAW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 666WJ-ESAW

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$22.22

2 Piece Broiler Pan

The top of this part is now black.

$69.92

Surface Element Kit with Limiter - 6"

This ceramic element kit comes with an overheat limit switch, two wires, and two wire connectors.

$16.02

Push-Button Clock Knob

$4.89

SCREW

Sold individually.

$22.14

SWTCH-LITE

$4.89

SCREW

Latch Lever Clip

$53.22

Oven Door Gasket

$29.02

Hinge - Left Side

The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inner Oven Glass broken

  • Customer: David from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 25 of 33 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 56 of 127 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

replaced heating element on flat surface stove top

  • Customer: dennis from assonet, MA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 26 of 38 people found this instruction helpful
I removed 4 screws and then lifted up the top it gave me access to the element I followed the direction that came with the element (very clear to follow) removed and installed the new element and it worked fine. Remember to unplug the stove if it is electric this is not in the instructions. read more