Models > 665HG-CHZ

665HG-CHZ Admiral Range - Overview

Get Parts and Repair Help for 665HG-CHZ

If you know the range repair part you need, you can browse the list of all parts on the 665HG-CHZ, or you can search by name or part description. You can also find your part by where it is located on the 665HG-CHZ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 665HG-CHZ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 665HG-CHZ [Viewing 3 of 3]

$2.52

Light Bulb - 40W

Sold individually.

$17.20

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$5.10

Oven Door Spring

Sold individually.

$34.32

Bake Element

This spade style bake element has push on wire terminals. It is found on the bottom of the oven.

$2.70

Screw

This screw is sold individually.

$3.82

Thermostat Clip

This clip is used to secure the thermostat bulb. They are sold individually.

$17.55

Light Blub - Fluorescent - 18 Watt

$67.82

Solid Surface Burner - 6"

$3.96

Lamp Retainer Gasket

$13.25

Clock Knob

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inner Oven Glass broken

  • Customer: David from Wayne NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 19 of 24 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 31 of 69 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

oven door spring broke and had to be replaced, oven light out and had to be replaced

  • Customer: Ed from Anderson IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 12 of 13 people found this instruction helpful
The old gasket fell apart as I replaced the oven light and had to be replaced. That was very easy once I received the part. The spring broke on the oven door and had to be replaced. I initially tried to reach in from inside the pan drawer under the oven. That was impossible to reaach but it only took a few minutes to realize that I had to remove the side... read more