Models > 66560619000 > Instructions

66560619000 Kenmore Microwave - Instructions

All installation instructions for 66560619000 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 66560619000
121-135 of 150
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replacement of filters

  • Customer: THEODOROS from VIRGINIA BEACH VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just replaced the filters

The small connector flaps broke off so the grille wasn't attached.

  • Customer: Clarissa from Fallston MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
With a phillips head screwdriver I removed the screws, which were screwed to the then non-existent grille, at the top of the grille holder, GENTLY popped the new grill into place and replaced the screws. It took about five minutes. As a housewife, I feel that doing these little repair jobs around the house saves my husband time and aggravation. It was all very simple, and I got the ordered part in two days. Fabulous!

machine was dead.

  • Customer: Mark from Smithtown NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "Part Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)

The opening was very tight

  • Customer: Humberto L. from Hallandale FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It was supposed to be a very easy replacement, but when inserted the legs in the bottom openings, the legs at the top didn't enter the opening.If insert first the top legs then the bottom legs could not go in. Tried to put a little force when turning grill to enter the top legs with the screws support. Finally very carefully put first the top legs, entering horizontally, and then giving a little push (forcing) the bottom legs in. This was not supposed to be this way, because I could had brake the bottom legs clip.

Replaced vent grill

  • Customer: Robert from Owosso MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Used a screw driver

rotating glass dish assembly making stange noise

  • Customer: Lawrence from Excelsior MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The lady in the Nova Scotia call center should get all the credit for being able to identify the part I needed from only the very limited information I was able to give her. Employee of the month for her. She also had such a great can do attitude. Lawence Baier

Cracked handle

  • Customer: Joseph from Aurora CO
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Well, to get to the screws for the handle, the door "choke" had to be removed, which was difficult, until I read that you need a putty knife. But I had already tried to take the old one off, and it was brittle & cracked, so I also had to purchase the "choke"/frame. Once the parts arrived (within 3 days!), installing them was easy, but then I had a problem with the door. It wouldn't shut correctly, which made the microwave shut off intermittently during use. So I had to determine which of the latch catches had the sensor. (It was the top one.) I tried adjusting it without any disassembly, but it fell out & down inside the oven. So I figured out how to get that part of the oven open. I had to remove the upper grill and the touch panel. Once those were out, it was easy to retrieve the latch catch & install it correctly. I reassembled the oven, and now everything works fine. This oven was manufactured for Sears by Whirlpool over-14 years ago, and has been very reliable, so I'm not complaining. Interestingly, I looked at new microwaves and found a Maytag model (also made by Whirlpool) almost identical to the one I have. I examined it and found that the door, touch panel and grill are almost identical and use the same parts as mine!

Broke a 15 year old glass cooking tray

  • Customer: Stephanie from La Jolla CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered the item on a Monday at 12pm and it arrived the next day. Amazing!

Replaced Broken Microwave Vent

  • Customer: Joseph from Nashville TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Total time to replace was 10 minutes, this included unpacking the new vent. Simple to install with 2 set screws on the top of the unit.

glass cooking tray droped and broken

  • Customer: janice from dunn NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just replace need cooking tray

Broken turntable support ring and missing support

  • Customer: Sharon from Pleasanton CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Watched video which reminded me to order support for the turntable support ring and did exactly what the person in the video did. Excellent and prompt service and all parts fit.

glass turn table would not turn

  • Customer: CJ from Bullard TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
After researching online, I found that I needed the turntable drive coupling, part#PS993087. when I went to your site it showed the same part but the part number had changed but said it would fit my microwave. Well, I was really surprised and happy when the part I received 3 days after I placed the order, with normal shipping,fit perfectly and now my turn table in my microwave works. I have marked this site a a favorite and will use it I'm sure soon. Being a single women and having to figure out how to fix the things on a small buget, I'm learning a lot and have a lot of respect for men that know how to do all the repair stuff. Thanks so much, I have been able to mark this off my list of things to fix. Have a nice day. Cj- age, 58

Loud buzzing noise and no heat.

  • Customer: Charles R from Libertyville IL
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
PartSelect website indicated replacing the high voltage power supply diode is the solution for "no heat" 99% of the time, but the diode was OK. There is more info at the website concerning the case of "loud buzzing and no heat" indicating the magnetron needs to be replaced. As an electrical engineer with knowledge of microwave components, this was also my best guess. However, getting to the magnetron is not the easiest job, but it's not impossible. You also have to be careful to bleed off any charge stored on the high voltage power supply capacitor. Luckily, I found my KitchenAid service manual tucked away inside the unit since I couldn't find it online.

broken cooking tray. Food not heating evenly.

  • Customer: James from Winter Park FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simply placed new dish on the rotating hub.

2 burned out bulbs under the microwave/important light source for kitchen stove.

  • Customer: Ferol from San Antonio TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.
All Instructions for the 66560619000
121-135 of 150