Models > 65C > Instructions

65C Maytag Dryer - Instructions

All installation instructions for 65C parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dryer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 65C
1-3 of 3
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stripped leveler screw making impossible to level my washer

  • Customer: Rebecca from Wylie TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 8 of 12 people found this instruction helpful
Put blocks under the washer where the leveling leg was needed and screwed the part into the washer. Then it was just a matter of moving the washer into place and leveling. Pretty easy.

worn roller wheel and bearing

  • Customer: David from Chadds Ford PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 0 of 1 people found this instruction helpful
replaced worn parts

Leg was mssing after move into new home.

  • Customer: Matthew from The Woodlands TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Purchased x4 new adjustable legs. Leaned the washer back and held in place with block of wood. Loosened the two older front legs with an adjustable wrench because they had a locking nut and replaced with new legs. Repeated process on back side of washer. Once all the new legs were installed leveled the machine adjusting the legs if necessary.
All Instructions for the 65C
1-3 of 3