Models > 65021

65021 - Overview

Models starting with 65021

Click on the best match to narrow your results.

Exact Part matches for your search term

[Viewing 2 of 2]
Nut 1/2-13 – Part Number: 65021
Nut 1/2-13
This part number matches the current model number 65021
PartSelect #: PS9293038
Manufacturer #: 65021
  No Longer Available
Assembly, Push Channel Weldment – Part Number: 65021
Assembly, Push Channel Weldment
This part number matches the current model number 65021
PartSelect #: PS16740007
Manufacturer #: 65021
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Wheel – Part Number: 532401274
Wheel
★★★★★
★★★★★
(1)
PartSelect #: PS9016096
Manufacturer #: 532401274
Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part.
$34.86
  In Stock
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.99
  In Stock
Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063
Nut, Flange Lock, 5/16-18, Grf
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$3.99
  In Stock
Cover, Dust, Wheel – Part Number: 581840401
Cover, Dust, Wheel
★★★★★
★★★★★
(3)
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$4.99
  In Stock
Clip, Hairpin – Part Number: 532003146
Clip, Hairpin
PartSelect #: PS9007536
Manufacturer #: 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1....
$3.99
  In Stock
Bolt, Handle – Part Number: 532191574
Bolt, Handle
★★★★★
★★★★★
(1)
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$3.99
  In Stock
Fuel Bowl O-Ring – Part Number: 951-11589A
Fuel Bowl O-Ring
PartSelect #: PS17016670
Manufacturer #: 951-11589A
Fuel Bowl O-Ring
$6.60
  In Stock
Nut, Flange Lock, 1/4-20, Grf – Part Number: 712-04064
Nut, Flange Lock, 1/4-20, Grf
★★★★★
★★★★★
(1)
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$3.99
  In Stock
Engine Zone Control Cable – Part Number: 532183567
Engine Zone Control Cable
★★★★★
★★★★★
(2)
PartSelect #: PS9015022
Manufacturer #: 532183567
This zone control cable is for lawn mowers. Zone control cable stops the engine when you let go of the handle.
$14.93
  In Stock
Key – Part Number: 951-10630
Key
★★★★★
★★★★★
(1)
PartSelect #: PS9172543
Manufacturer #: 951-10630
This key a genuine manufacturer-sourced replacement part for use with outdoor equipment. They key is inserted into the ignition to power on the equipment. It is made of durable plastic and is approxim...
$6.64
  In Stock
Blade – Part Number: 532406712
Blade
PartSelect #: PS9022471
Manufacturer #: 532406712
$17.43
  In Stock
Height Adjuster – Part Number: 581497907
Height Adjuster
PartSelect #: PS11824350
Manufacturer #: 581497907
$17.43
  In Stock
View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cable was broke.
Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.
Parts Used:
Engine Zone Control Cable
  • James from ASHTABULA, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socket. It was a very easy repair.
Read less
Parts Used:
Wheel
  • Russ from ALTENBURG, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Carburetor rebuild
I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- jtandree@gmail.com
Parts Used:
Carburetor Gasket Plate
  • Jason from PEABODY, MA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top