Models > 645D

645D Cub Cadet - Overview

Models starting with 645D

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Grommet – Part Number: 692189
Grommet
★★★★★
★★★★★
(1)
PartSelect #: PS9294797
Manufacturer #: 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you...
$5.34
  In Stock
Carburetor Rebuild Kit – Part Number: 495606
Carburetor Rebuild Kit
★★★★★
★★★★★
(1)
PartSelect #: PS8983479
Manufacturer #: 495606
This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish you...
$36.73
  In Stock
Grommet – Part Number: 692187
Grommet
★★★★★
★★★★★
(2)
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and ...
$5.34
  In Stock
Tube-Pick Up – Part Number: 391813
Tube-Pick Up
PartSelect #: PS8966338
Manufacturer #: 391813
  No Longer Available
Gasket-Fuel Tank – Part Number: 692241
Gasket-Fuel Tank
PartSelect #: PS9294811
Manufacturer #: 692241
$5.60
  In Stock
Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451
Carriage Bolt, 5/16-18 x .75
PartSelect #: PS10001568
Manufacturer #: 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into pla...
$3.99
  In Stock
Magneto – Part Number: 397358
Magneto
PartSelect #: PS9278124
Manufacturer #: 397358
$58.83
  In Stock
Gasket-Breather – Part Number: 27549S
Gasket-Breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$4.99
  In Stock
Carburetor – Part Number: 498298
Carburetor
PartSelect #: PS8988825
Manufacturer #: 498298
$136.54
  In Stock
Gasket-Crkcse (.015 Thick)(Stand) – Part Number: 692213
Gasket-Crkcse (.015 Thick)(Stand)
PartSelect #: PS9063744
Manufacturer #: 692213
The Crankcase Gasket (.015) is a manufacturer-certified part which is rated as being "Medium" difficulty to install. It will require a screwdriver, socket set, wrench set, and nut driver. It s used to...
$3.99
  On Order
Air Filter – Part Number: BS-491588S
Air Filter
PartSelect #: PS9183894
Manufacturer #: BS-491588S
$17.39
  In Stock
Screw – Part Number: 692198
Screw
PartSelect #: PS9294799
Manufacturer #: 692198
$6.52
  On Order
View More
Back to Top

Common Symptoms of models starting with 645D

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
Magneto
  • Thomas from ALFRED, ME
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old diaphragm dried up
Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the kit but it had what I needed.
Read less
Parts Used:
Carburetor Rebuild Kit
  • Steven C from CENTREVILLE, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top