61004753 Kenmore Refrigerator - Instructions

I removed the outer cover from the door, removed the broken parts, and cleaned the area of debris. After cutting off the power, I replaced the solenoid and door, then prepalce the outer cover. The parts were delivered promptly, and the job when very well.

Couldn't believe how easy this was. The pictures you provided were perfect everything went exactly as the instructions said. I had to of saved at least $150.00. I would grade my mechanical skills at about a C+ at best and this was an easy fix.
If I need appliance parts, I now know where to go.

Pulled out ref. removed 3 screws holding the fiber covering. Removed one screw holding the water inlet, disconected the elecrical and the water line from supply and the tubing going to the water filter.
Then connected water lines and the electrical to new inlet, and attached the new inlet back with the one screw, reattached the fiber backing. All Done.

Note: ice cube tray did not fill immediately...air in water line??? However, after short time all works fine.

First I removed the 5 torx head screws that held on the outside panel. Then I unplugged the 2 electrical connectors to the circuit boards, one goes to the touch pad the other is the power. Then I removed the assembly. I only needed the part that holds on the round door but I replaced all the parts that came in the kit.
With the directions that they sent me with the parts, and since I was the one that took it apart. I was able to fix it in about 20minutes and it worked great.

Replaced outlet water valve, the job went quite well no problems. The best thing about this repair was able to order the part on line, and have it shiped to my front door,

Removed the front panel and all associated parts from the water and ice on the door.

My husband had taken everything apart and was ready to order a whole new panel. After reading some of the stories on the website of people having the same problem (no ice would come out, water would come out & not stop or splatter everywhere) we decided to start with the part everyone seemed to have ordered. After ordering the part, it arrived faster than I expected, and solved the problem. It helped reading the other stories so we knew what kind of tools were needed and other helpful hints. I have already recommented partselect.com to my sister in law to help with a dishwasher repair.

Replaced flapper, and solenoid per the instructions. It was much easier than I had anticipated. The hardest part was reconnecting the control wire to the front panel. Not much room to get your hands in there, but it finally went together...

Ice Dispense Repair on front door:
Just followed the directions to remove that front panel, removed the screws, as needed, to take out the unit. The new parts installed easily, in fact, much easier than I thought it would be. Just re-assembled unit and was back in business...

Easy to install and it works fine. Recommend using the instruction manual and it was a breeze

i removed the front cover of the dispensor, easily put the parts in and put back together , the first tome the flpapper came off as i did not secure properly but it only took a few minutes to resecure and now working fine .

The repair did not work. The new door strike did not embrace the solenoid.

I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.

Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.

VERY EASY AND WAS INSTALLED IN NO TIME> Many Thanks J

Followed instruction provided. Ice door only part required.

Installed solenoid kit.

Most importantly, watch the video.Made installation real simple. Better than paper instructions that come with kit.