Models > 61004752 > Instructions

61004752 Maytag Refrigerator - Instructions

All installation instructions for 61004752 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 61004752
121-135 of 150
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The ice in the storage tray would melt and stop up the delivery door.

  • Customer: Marcus from Redfield AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Got online typed in Maytag repairs. Watched the repair video. At that point I removed the door assembly (5 screws total) saw the broken door. Ordered the part from Partselect. Part was delivered in 3 days and installation was a very easy process.Thanks for the help.

broken dispenser

  • Customer: Harrison from Darien GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
easy, followed instructions and installed new parts.

Bracket that moves the ice door chute broke allowing the door to fall into the chute

  • Customer: Ken from Cleveland TN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Watched the video and followed the instructions ... time to repair was slightly longer than expected due to the fact that my fridge had wood panels requiring removal. Still, the video was terrific since I am a visual type person.Part Select service was amazing ... ordered one day and the part arrived at my door the very next day. Had the same type of service on a previous repair to replace the ice crushing part of the ice maker. What a company!!! Thanks so much.

Ice dispenser would not shut off

  • Customer: Joe from Manhattan Beach CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Followed video from site. There was one extra wire to disconnect, but it was obvious and not really a surprise considering age of refrigerator. Great assist.

water would dispense at the door when the ice maker refilled

  • Customer: john from sulphur LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
I shut the water valve and bled the pressure off by using the water dispenser. Removed the four screws that hold the cardboard backing on the unit. Unplugged the power cord, loosened the metal water supply fitting. Then I removed all three hose fittings and dried the drips with a towel. I pushed the electrical plugs off with a flat blade screw driver. Removed the bracket attachment screw and pulled the double valve out. The new valves came with a push-lock fitting for the plastic hoses so I pushed them into their sockets. Put the new valve in and replaced the attachment screw. Reattached the water supply line and the electrical connectors. I turned the water on and checked for leaks. replaced the cardboard backing, and plugged the power cord back in.

The flapper door broke

  • Customer: JW from Garner NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the directions from the YouTube video, which were spot on correct! Loved it. No problems. I did have to wind the spring one more turn than it showed on the video, but that was easy to figure out. No problems!

The actuator for dispensing water and ice was sticking, splaying water and ice freely all over our hardwood floors..

  • Customer: Wayland from Fresno CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I watched a 5-minute video of a man removing the door hinge, the face plate, the other connections down to the actuator itself. I called Emerald and talked to Ron Harrigan (Fresno CA). He pointed me to the video and said it was a simply operation. I followed the instruction step by step, but when I finished, the light in the front of the door would not come on and the dispenser would put out water but not ice. I called Ron again. He said, "Go through the process again, step by step." When I got to step two, I saw that I had not securely fastened two electrical joints together. I snapped those babies into place, and it was all downhill! We have ice. We have water. We have an actuator that sings! Thanks, video. Thanks, Ron.

Flapper door tab broken. Water would stick on.

  • Customer: Michael from Pendleton IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Followed the simple video instructions provided with my laptop on the counter.

Door Kit Broken

  • Customer: Howard from Fulton TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
I had to buy the ice dispenser solenoid AND door kit just to get the door kit. The little flapper door was all that needed repair. I followed the video and this was so easy.. anyone could do this repair. PartSelect made this small job easy. Many thanks. HBoykin

Icemaker door flap bracket broke

  • Customer: KEVIN from RAMSEY MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
The home service repair through our utility company checked the refridgerator and then looked for parts. Their conclusion is the part was no longer available and we should "just reach into the icemaker when we want ice until we replace the refridgerator.) The refridgerator is a top of the line model and replacement cost is well over $2,000 so that wasn't a good option. So I checked PartSelect and found the part which I received in 3 days, installed it in a few minutes and we're back in operation!

water dispenser was leaking

  • Customer: Robert from Phoenix AZ
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Followed the video exactly. Replaced both valves in less than 1 hour. No more leakage. Very simple!

Ice door broke

  • Customer: Alfred from Woodbury MN
  • Difficulty: Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the instructions that came with the kit.

Flap on ice dispenser was broken

  • Customer: Joan from Bessemer AL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
We put all the new parts in that came with this kit including the Solenoid. It was super easy. I have a home warranty which covered the refrigerator ice maker, however, it would have cost me $75 just to bring out a repairman and then it would have taken up my time to be around when he wanted to come out. Buying this part and doing the job ourself cost me less money AND time.

actuator pad was old and started to lose its flexibility

  • Customer: angky from hacienda heights CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
saw the youtube.com presentation, and followed the procedure from there on.

low water pressure for ice maker and water for drinking

  • Customer: jim from De Soto MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
replacing the electric water valves was not to bad took about 30 minutes but still had low water pressure traced it to the filter housing had good pressure going in but low coming out so I removed the housing and found a rubber washer was restricting the water flow so I removed the washer ,put it back together and it worked fine
All Instructions for the 61004752
121-135 of 150