Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 61004752

61004752 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 61004752

If you know the refrigerator repair part you need, you can browse the list of all parts on the 61004752, or you can search by name or part description. You can also find your part by where it is located on the 61004752 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 61004752 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Exact Part matches for your search term

[Viewing 1 of 1]

DISCONTINUED

This part number matches the current model number "61004752".

Sections of the 61004752

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.21

BULB-LIGHT

Sold individually. This bulb is a 7-watt appliance incandescent light bulb. This appliance light bulb is two inches long. It is used for many clothes dryers. You will need a Philli...

$75.92

Ice Dispenser Solenoid and Door Kit

In addition to the solenoid (115V), this kit also comes with a door strike and an ice door assembly. Please be advised the spring and roll pin are not included with this kit.

$15.38

Limit Switch - 2 Terminal

This limit switch, also known as a dispenser switch, is used in refrigerators and freezers. The function of this part is to control the dispensing of ice or water when the dispense...

$18.93

Actuator Pad

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water.

$75.02

Double Outlet Water Valve

This valve is located behind the refrigerator. It has a 1/4" compression inlet fitting. This part is a solenoid-operated switch that, when activated, releases water from the suppl...

$6.33

Ice Chute Door Return Spring

Sold Individually.

$5.58

Compression Nut

The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required ...

$80.37

Dual Outlet Water Valve Kit

This double outlet water valve kit replaces the sometimes problematic plastic "Y" connector.

$28.84

Fountain Bracket - White

This fountain bracket is nine inches long. It is all white in color and it is made entirely of plastic.

$4.94

Roll Pin

This roll pin is less than an inch long and is made of metal.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Dispenser "round chute" broken side tab, ice/water fountain not working

  • Customer: Scott from Walker, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 112 of 122 people found this instruction helpful
I could see that a tab was broken from the round chute that opens for ice dispensing and closes to seal off freezer ice chute when not in use. With the tab broken, the round door would not shut to seal the freezer chute and dispensing water would spatter everywhere. I looked for just the round door part, but is only sold in the "Ice dispenser solenoid and d... read more

Ice maker and water dispenser would stick on. Would have to oprn door to stop flow of water or ice

  • Customer: David from Springdale, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 80 of 87 people found this instruction helpful
I replaced the actuator switch and rubber pad with the switch actuator.
I had attempted to repair previously without replacing the pad but the problem continued. I put up with the problem for a long time waiting for the opportunity to get to the appliance parts store but their hours are hard to deal with and work myself. I was able to find the part eas... read more

Ice Maker had quit due to faulty valve

  • Customer: Brian from Imperial, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 65 of 75 people found this instruction helpful
Repair work was very easy. Water supply was to the icemaker/water dispenser. After removing the outer fiber cover with a screwdriver, the valve was removed by unscrewing one nut. Post removal water lines were removed with a ordinary pair of scissors approximately 1/2" from where it entered the faulty valve. the two electrical connections were then remove... read more