Models > 605

605 - Overview

Models starting with 605

Click on the best match to narrow your results.

Exact Part matches for your search term

[Viewing 3 of 3]
RANGE CORD 5
RANGE CORD 5' 50A 4W
This part number matches the current model number 605
PartSelect #: PS3650662
Manufacturer #: WX09X10036
$42.37
  In Stock
Screw – Part Number: 605
Screw
This part number matches the current model number 605
PartSelect #: PS9984941
Manufacturer #: 605
$3.99
  Special Order
Clamp bearing – Part Number: 605
Clamp bearing
This part number matches the current model number 605
PartSelect #: PS12432866
Manufacturer #: 605
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Handle - White – Part Number: 3000005306
Handle - White
PartSelect #: PS12164179
Manufacturer #: 3000005306
$11.83
  In Stock
Grommet – Part Number: 692187
Grommet
★★★★★
★★★★★
(2)
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and ...
$5.34
  In Stock
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.99
  In Stock
Spring-Rewind Str – Part Number: 490179
Spring-Rewind Str
PartSelect #: PS8978476
Manufacturer #: 490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually...
$15.43
  In Stock
Gasket-Intake – Part Number: 27355S
Gasket-Intake
PartSelect #: PS8941014
Manufacturer #: 27355S
$4.99
  In Stock
Plastic Bushing .380 ID – Part Number: 941-0475
Plastic Bushing .380 ID
PartSelect #: PS9167515
Manufacturer #: 941-0475
This is an authentic OEM part for Craftsman lawn and garden equipment. This bushing has an internal diameter of 0.380", is made of durable black plastic, is not part of an assembly or kit, and is sold...
$4.99
  In Stock
Gasket-Breather – Part Number: 27549S
Gasket-Breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$4.99
  In Stock
Element-Air Cleaner – Part Number: 27987S
Element-Air Cleaner
PartSelect #: PS8941642
Manufacturer #: 27987S
$7.15
  Special Order
Ball-Clutch – Part Number: 691604
Ball-Clutch
PartSelect #: PS9064356
Manufacturer #: 691604
The clutch ball allows the center part of the ratchet to turn backwards freely but catch when turned forward in your engine. This is an OEM part that is made of metal, and it is silver in color. Thi...
$4.99
  On Order
Screw – Part Number: 691640
Screw
PartSelect #: PS9294686
Manufacturer #: 691640
$3.99
  In Stock
Hex L-Nut 5/16-18 Thd. – Part Number: 912-0429
Hex L-Nut 5/16-18 Thd.
PartSelect #: PS9164534
Manufacturer #: 912-0429
$3.08
  Special Order
Ignition Set – Part Number: 294628
Ignition Set
PartSelect #: PS8947597
Manufacturer #: 294628
  No Longer Available
View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could not keep an aftermarket muffler on the engine.
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the muffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Read less
Parts Used:
Muffler
  • Richard from KERNERSVILLE, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top