Models > 5KSB555BBU0 > Instructions

5KSB555BBU0 KitchenAid Blender - Instructions

All installation instructions for 5KSB555BBU0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the blender repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 5KSB555BBU0
1-3 of 3
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Jar broke

  • Parts Used:
  • JAR
  • Customer: Karl from Pelham NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
So sad when I forgot to take the spoon out of my nice new blender, causing it to break the jar! But, for a fair price and a few short days of waiting, Partselect sent me a new jar. The smoothies are pouring once again!

coupling got chewed up

  • Customer: shelley from Homer AK
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
to replace the coupling you take the bottom off the blender and loosen the screws that hold the bracket and fan -then comes the hard part-the shaft screw is bolted through every bit of the guts then into the coupling. It is a lefthand thread. I ended up having to fabricate a piece of metal that slipped into the top of the coupling (in the teeth.) Then I secured the metal piece-it was just a twi inch piece of steel- in the vise, I held the blender and I got a big guy to attack the shaft bolt with a bunch of pressure and a straight screwdriver. It finally popped and I was able to unscrew the old coupling and replace it with the new. Reminds of when guys put on lug nuts and I have to try and get them off. But I saved at least $100.

Collar would not sit down on the blender base.

  • Customer: Tammy from New Bloomfield PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
No installation required. The new collar came with the sealing ring, locking collar and blade assembly - everything needed in one piece. I just put it on the base and attached the pitcher.
All Instructions for the 5KSB555BBU0
1-3 of 3