Models > 59673503201 > Instructions

59673503201 Kenmore Refrigerator - Instructions

All installation instructions for 59673503201 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 59673503201
616-630 of 864
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The tip on the end cap that holds door to the deli drawer broke off

  • Customer: Marilyn from University Heights, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I actually hired a handyman who easily performed the repair

The plastic tab that holds the deli drawer cover broke off

  • Customer: Frank from Pomona Park, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Removed crisper drawers, removed glass shelf and deli drawer and cover. Remove screws holding the sliding attachment and pantry end. After taking the old pantry end off I noticed that there was a plastic insert that went from the front to the rear, made a 90 degree turn and went to the rear area of the unit and was used to control the temp in the deli drawer. Took a little while to figure out how it worked and finally put it all together and reversed all of the steps taken to replace everything. Once I figured out the temp control slide it was easy to get it back together.

Replacing lower door bin

  • Customer: Vaughn from Alva, OK
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Lift out the old door bin and replace with the new door bin. Very simple job.

water was slowing down

  • Customer: William from Bronxville, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Unscrewed the old filter and screwed in the new one

Light switch in the refrigerator was faulty from the first day we installed the fridge.

  • Customer: Mary from Wasilla, AK
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I had ordered some other parts for something entirely different off your website and service was great. So after almost ten years of a dark refrigerator, because of a defective switch, I decided to see if you had the part to fix it... You did and the part got here in 3 days. I had a working light switch and all the light in the world where my husband needed it most (in the fridge). It took me at the most ten minutes to replace the part. All is well now and I have a happy husband who can find the leftovers just fine. Thanks for your great service!

Ice maker stopped making ice.

  • Customer: Brenda from Stoneham, MA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I followed the instructions from your video. I did this replacement all by myself. I am a 64 year old woman and have never done anything like this before. It could not have been any easier.

valve broken

  • Customer: gene from green field, IA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
son inlaw

Water running into ice bin and freezing

  • Customer: Frank from Greenwich, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced icemaker and used wire harnnes and plastic cover off old one. Real easy!!

Change Ice Maker/ Water Fill Cup

  • Customer: allen from holland, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
The ice maker change out was easy. The problem was the part came with a different filler cup but the one needed was supplied. Changing to the other cup required taking the ice maker apart and installing the other filler cup. Go to the parts list and find the filler cup. Use instructions found there to change to other cup and then install your ice maker.

Broken deil cover

  • Customer: Richard from Snowmass Village, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
squeezed in the ends of the cover to insert the posts. It was very easy! But, be careful, don't over do it, line it up first!

iceing up

  • Customer: FLOYD from STARBUCK, WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I found the video and write up’s very useful for repairing a newer refrigerator that just ran out of warranty.

No light in frig

  • Customer: Irene from Whitehall, MT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
We tried repairing with a new switch which was very easy to install but it didn't fix the problem.

The maid broke off the tit that holds the lid to the meet drawer in place and allowes it to open and close

  • Customer: John from Summerfield, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Removed the drawer. 2 Removed the crisper drawers. 3 Removed the glass shelf and metal supports for that 4 Removed the 2 screws that held the slide in place 5 Removed the 3 screws that held the end cap in place 6 Carefully removed the end cap and temperature regulator from the refrigerator 7 Carefully removed the drawer temperature regulator mechanism from the old slide. 8 Reversed the above instructions to replace everything.

no ice.

  • Customer: corey from des moines, IA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Changed the ice unit. Found it was not the problem. Then I changed the solenoid that dispenses water to the ice maker. That is what was defective.

the pantry door hindge broke off

  • Customer: Sarah from Clinton, MS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I emptied the two drawers above the pantry shelf and the glass above the pantry drawer. removed the pantry drawer and the metal slide. took parts off the old side off and put them on the new. replaced the new part back into the ref. screwed it back in put the pantry drawer backin and the pantry door on. It took longer to replace the food items than fix the problem. Thank you for making it so easy.
All Instructions for the 59673503201
616-630 of 864