Models > 58632 > Parts

58632 (P1317501W W) Amana Refrigerator - Parts

All parts for the Amana Refrigerator 58632

Below is a list of all parts for the Amana Refrigerator 58632 - REF - SXS/I&W. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 58632
1-14 of 267
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$105.19

Replacement Ice Maker

NOTE: This replacement ice maker mechanism does NOT come with a cover,shut off arm, a wire harness, or the mounting hardware. Must be ordered separately.

$37.46

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$30.70

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air cooling for the condenser coil.

$7.45

Door Closure Cam Kit

This part helps with the closing of the door and helps keep them in position.

$6.46

Light Rocker Switch

$4.14

Light Bulb - 40W 120V

Sold individually.

$22.22

Defrost Timer Kit - 120V 60Hz

The timer will shut off the cooling system of the refrigerator and the defrost heater will turn on.

$15.21

Water Fill Cup and Bearing

$2.70

Screw

This screw is sold individually.

$4.70

Compression Nut

$36.50

Bimetal Defrost Thermostat

This part will cut out at 48 degrees Fahrenheit and kick back in when the temperature drops to 33 degrees Fahrenheit.

$7.71

Refrigerator Kick Plate Grill Clip

This refrigerator kick plate grill is sold individually. Order two if you need to replace both clips. *Please note, if you are ordering the kick plate, check with your model number...

$30.45

Single Outlet Water Valve Kit

The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.

All Parts for the 58632
1-14 of 267