Models > 58075062501

58075062501 Kenmore Air Conditioner - Overview

Sections of the 58075062501

[Viewing 5 of 5]
Air Handling And Cycle Parts Diagram and Parts List for Kenmore Air Conditioner
Air Handling And Cycle Parts
Cabinet And Front Grill Assembly Parts Diagram and Parts List for Kenmore Air Conditioner
Cabinet And Front Grill Assembly Parts
Compressor Parts Diagram and Parts List for Kenmore Air Conditioner
Compressor Parts
Control Box Assembly Parts Diagram and Parts List for Kenmore Air Conditioner
Control Box Assembly Parts
Installation Kit Assembly Part Diagram and Parts List for Kenmore Air Conditioner
Installation Kit Assembly Part
Keep searches simple, eg. "belt" or "pump".
BEARING – Part Number: 4280A20004M
BEARING
★★★★★
★★★★★
(2)
PartSelect #: PS12075835
Manufacturer #: 4280A20004M
$7.67
  In Stock
REMOTE CONTROLLER ASSEMB – Part Number: 6711A20066L
REMOTE CONTROLLER ASSEMB
★★★★★
★★★★★
(1)
PartSelect #: PS3636484
Manufacturer #: 6711A20066L
$28.21
  On Order
Thermistor,NTC – Part Number: 6323A20012C
Thermistor,NTC
★★★★★
★★★★★
(1)
PartSelect #: PS3528997
Manufacturer #: 6323A20012C
This part is a thermistor assembly and it works in conjunction with your room air conditioner. The thermistor is a sensor that attaches to the control board of your air conditioner. Once attached it w...
  No Longer Available
CLAMP,SPRING – Part Number: MBU64446301
CLAMP,SPRING
★★★★★
★★★★★
(1)
PartSelect #: PS16224004
Manufacturer #: MBU64446301
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$6.37
  In Stock
Side Curtain and Frame - Right Side – Part Number: 4959A20001A
Side Curtain and Frame - Right Side
PartSelect #: PS3524511
Manufacturer #: 4959A20001A
Also known as an accordion.
  No Longer Available
GRILLE ASSEMBLY,FRONT(IN – Part Number: 3531A20168M
GRILLE ASSEMBLY,FRONT(IN
PartSelect #: PS3558583
Manufacturer #: 3531A20168M
  No Longer Available
CURTAIN ASSEMBLY – Part Number: 4959A20001B
CURTAIN ASSEMBLY
PartSelect #: PS3585756
Manufacturer #: 4959A20001B
  No Longer Available
Power Cord Assembly – Part Number: 6411A20056A
Power Cord Assembly
PartSelect #: PS3529076
Manufacturer #: 6411A20056A
$87.60
  In Stock
Louver,Vertical – Part Number: 4758A30037A
Louver,Vertical
PartSelect #: PS3523405
Manufacturer #: 4758A30037A
$6.37
  Special Order
Curtain Installation Kit – Part Number: 3127A20083A
Curtain Installation Kit
PartSelect #: PS3518395
Manufacturer #: 3127A20083A
This is used for window air conditioners.
  No Longer Available
Capacitor,Film,Box – Part Number: 0CZZA20005B
Capacitor,Film,Box
★★★★★
★★★★★
(1)
PartSelect #: PS3517198
Manufacturer #: 0CZZA20005B
$37.95
  In Stock
Mechanical Part,Unclassified – Part Number: 5040AR4195A
Mechanical Part,Unclassified
PartSelect #: PS3526226
Manufacturer #: 5040AR4195A
$6.37
  In Stock
View More
Back to Top

Questions And Answers for 58075062501

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 58075062501

[Viewing 2 of 2]
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Does not shut off
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bad thermistor
Took front cover off air conditioner and pulled it a little forward out of the outdoor housing. I then flipped the LED display section out to the left and exposed the patch panel. The next step was to remove the panel with a small screwdriver and disconnect the old thermistor plug. I then plugged in the new one, remove the old one from the grid bracket and placed the new one in. I then replaced everything else in reverse order. I have two LG air conditioners and they both have the same connection setup.
Read less
Parts Used:
Thermistor,NTC
  • Cindy from Baltimore, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad thermister, unit would run constantly without cycling.
Remove the front cover. Slide the unit forward a few inches from the case. Remove 1 screw from the top on the control box. Unsnap the old thermister leads going into the circuit board. Snap in the new thermister and place the end in the plastic holder in front of the coils. Install front cover.
Parts Used:
Thermistor,NTC
  • Gary from Aurora, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top