Models > 56 5462 10 04

56-5462-10-04 Tappan Microwave - Overview

Get Parts and Repair Help for 56-5462-10-04

If you know the microwave repair part you need, you can browse the list of all parts on the 56-5462-10-04, or you can search by name or part description. You can also find your part by where it is located on the 56-5462-10-04 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.71

Touch Up Paint

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.

$3.43

Carousel Tray Drive Bushing - 1/4" Shaft

This part helps turn the glass turntable tray in your microwave.

$5.71

SCREW

$0.68

NUT

Interlock Switch

This part is used to stop the flow of electrical current when the door is opened to prevent any microwave energy escaping.

Carousel Glass Cooking Tray

FUSE

MOTOR-TURNTABLE

$35.74

LAMP 40 W 120 V CLE

SPACER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken carousel drive bushing

  • Customer: Galen from lowanger LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 9 people found this instruction helpful
popped new peice on and that was it read more

plastic bushing broke --- turntable was just a non-turning table

  • Customer: Carolyn from Globe AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
It took me a burnt bag of Orville's popcorn to notice that the turntable wasn't turning. After a tantrum and a bit of foul language, I Googled the brand & model. Up popped Parts Select of whom I'd never heard. THE PARTS LOCATOR IS FANTASTIC! I found exactly what I needed---checked a few other sources, but found nothing. I was a bit hesitant at ordering,... read more

Turntable motor was worn out - gears were slipping

  • Customer: Chad from Roanoke VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
The job was very simple, remove the bottom plate of the microwave which is four screws and it exposes the motor. There are two screws which hold the motor in place that you access from inside the unit. Remove the two screws being carefull not to lose the gasket that is in between the motor and the bottom of the unit. Set the new motor in place being sure to ... read more