Models > 4VET22NKGW00

4VET22NKGW00 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 4VET22NKGW00

If you know the refrigerator repair part you need, you can browse the list of all parts on the 4VET22NKGW00, or you can search by name or part description. You can also find your part by where it is located on the 4VET22NKGW00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 4VET22NKGW00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 4VET22NKGW00 [Viewing 5 of 5]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$53.82

Crisper Pan

This crisper drawer is clear plastic. Sold individually.

$7.20

Door Shelf End Cap - Left or Right Side

Sold Individually.

$8.59

Light Rocker Switch

This light switch is triggered by the door opening and closing.

$4.34

End Cap Trim Piece

Sold individually.

$34.28

Door Shelf Retainer Bar

End caps are sold separately.

$4.66

SCREW

Sold individually.

$74.11

Crisper Drawer Glass

Frame Not Included. Glass Only.

$8.07

Ice Pan

This part may come in white or clear plastic, but either will still work and fit properly in your appliance.

$4.95

End Cap Trim - White

$18.39

Light Socket Kit

The bulb is sold separately.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 53 of 64 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS, MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 44 of 51 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more

Frost-free freezer was frosting up

  • Customer: Victor from Worcester, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 19 of 22 people found this instruction helpful
First I cut the gasket-fip with the wire cutters. Then I removed the gasket by pulling it away from the center if the door (not perpendicular to the door). I placed the new gasket over the door, secured the corners first, then pressed the rest of the gasket into place.

The repair to the refrigerator door (lower compartment) stopped the freezer f... read more