4KSRS25QFA00 KitchenAid Refrigerator - Instructions

I found this part on PartSelect. I was so excited it also showed a video on how to fix the door. My neighbor said he would help me and I ordered the pkg. It took 3 days to get here since I ordered Friday night and the part arrived Tuesday , this was the Easter Sunday week end also. Well the video said it was easy to do and I think it said it would take 15 min. My neighbor had it fixed in 10 min. I could not be happier. Thanks Part Select and my neighbor Mike.

I watched the installation on your web site and followed your directions and it fell right into place. Absolutely no problems. Thanks.

Was surprisingly easy. Hardest part was taking the cover off the front to get access to the control bracket and switches. Can be done by prying two notches on underside of cover until they pop. Then slide up and off. Once off I could immediately tell the plastic clips on control bracket were broken. So replacing fixed that issue. My other issue was the ice dispenser door would not stay closed and sealed. I noticed that the plastic hook that holds metal dispenser pin in place was broken. Had trouble finding that part online so I superglued it in place and that has held it just fine. Now both my ice dispenser and water dispenser are working after buying a $10 part. This site is awesome. I am sure I would have paid $200 for this from a repairman.

The how to video told me what to check to determine what part was probably broken. Then another video showed me how to take it apart. It gave me the name, number, and a photo of the part. I ordered it from Part Select without even checking with another retailer since they gave me the information to do it myself, saving me lots of $ for repair labor costs! Then I watched the repair video again and put it back together! It works! It was simple and I really appreciate this service! Thank You

The repair went extreamly easy and exact to detail. I followed the video step by step, and that turned the assembly into a professional job.

Remove drip pan from indoor ice dispensing system remove to bottom screws holding dispenser faceplate .lift faceplate out of the way exposing the bracket and ice and water dispenser micro switches be careful in removing microswitch, the one I removed came apart and had a little difficulty putting it back together ,used super glue and fix that problem. No instructions came with bracket so take your time. This is a relatively simple job any one should be able to do it.

Simple repair that anyone can do. 3 screws held the old one and it was out in 1 minute. Installed the stop from the old one plugged in the wire harness and reattached the new one. No need to cal a repairman for this job. probably saved $100 easy!

followed the informative how-to video available on this site

Per instructions in video. Super easy. Spent 45 min. cleaning ice/water dispenser and ice maker tray. Spent 15 min. replacing ice door.

Watched the video on the Partsselect how to remove and install the icemaker. It made the job real easy to do. It took about 20 minutes to exchange it out. It took me about a extra 30 minutes to remove the water line to the icemaker and install a in-line filter. The water froz up where it pours into the icemaker. Ran some hot water through the line, reinstalled the line and everything works great now for over a week. Just a extra tip always check the water line to make sure Its clear. George Fontana CA

I put in the new one in about 15 seconds. It was really easy.

Followed the DYI Video provided by partselect. Best advice, take a digital pic prior to disasembly, which of course I didn't! My cordless screw driver w/o the tip, is the same size as the screws thus no need for a nut driver.

I had two repair problems. #1- Ice door kit & #2 control bracket. I followed the instructional video and completed repair in under 30 minutes. I surprised myself and had a happy wife.

First I read your trouble shooting guide and determanded it was the ice maker. Then I watched your repair video which was very helpfull. I ordered the new icemaker, When it arrived I installed per video using only a 1/4 inch nut driver. IT was esay. New ice maker works great.Thank You for the information you have online and the parts and service.

Moved the refrigerator out, unscrewed old fill tube, pulled it out, placed finger-screw on water line, screwed it on, put in new fill tube, re-screwed fill tube in place, put refrigerator back into place. Done!