4KSRS22QDW00 KitchenAid Refrigerator - Instructions

Impossible to pass the water tubing through the door as kitchenaid spliced the water tube behind the dispenser and also within the door with tube connectors and not to mention that it was also bundled with the wiring harness. I freshen the connections behind the door and after the tubing exited the door. No leak so far. The only piece of the purchased tubing I used was the spout and attached 12 inch strip of the tubing.

Replacement was quite easy. Video was helpful as to how to get all pieces back on the shaft correctly. Was easy to find the correct part and was shipped quickly.

Repaired as in your video on replacing the ice maker. Excellent.

I ordered a new micro switch to do the repair. When I took face plate off the front of door two pieces of broken plastic fell out. Those pieces were part of what holds the switch in place, I need to order that part but I was able to use small tie wraps to hold switch in place and it has been working for a week now. The videos on this site are very helpful and gave me confidence to do the repair.

I had already removed the ice container & realized the very end of the auger (drum) was broken. I still don't know why this part is plastic. I ordered the auger drum on Monday & received the part Wednesday morning by Fedex. I then retrieved your repair video by Steve on-line and paused it as I duplicated each step. The process was really very easy (I even surprised myself). The unit now works as it did when new. To think I went for over a month and the repair was so simple and inexpensive. Thanks also to your customer service rep who put my mind at ease that this was the correct part (My auger was totally plastic & different from the one in the illustration). He said if my model number said this part would fit, then it would and it did.

I followed directions to take off the front of the water and ice maker then I saw the switch but I found out the plastic piece that held it in place was broke. I didn't order a new piece I used my reliable super duper quick glue and put the broken pieces to geter then put switch in place. then volla I had the water running like it did before. Thank you for telling me how to get the front off. That was the life saver.

I took the ice bin and crusher down to find the problem. I needed a new auger. I did a Google search for the part and found instructions for taking the crusher mechanism apart. This went smoothly until I went to put it back together. I had to follow the instructions in reverse which was really difficult. I advise folks to use their cell phone camera to take close up pictures of the dismantling process . Use these to help you put it back together. All in all, I was very pleased and plan to return when another need arises. John (retired x 2)

Shut off water to icemaker, unplugged frig, loosened top 2 screws on iccemaker, removed bottom screw, unplugged icemaker and removed from frig. new plug in was the same so didn't need to chan ge it. reversed steps to install, back in businees in less than 15 mins., making ice and no leaks!!!!!!!

The disassembling and replacing the broken part went exactly as the directions.

Unplugged the refrigerator then removed two vertical screws on the very back back of the control panel (the ones with the washers). Do not remove the four other vertical screws in the panel. The front plastic plate on control panel snaps off and there are two horizontal screws under the plate. Remove them and the control panel will drop down allowing access to the light switch. Unplug the two wires (one black and one white) from the old switch. Discard the old switch, snap the new one into place and reconnect the two wires. Snap the front plastic plate back into place, plug in the refrigerator and you are done! Problem solved with a new $16.00 switch and saved at least $75.00 or more from an appliance repair call. Thanks Part Select!

Followed the example on the video and everything fit in place without any problems. Only issue is that on a double door fridge the freezer is rather narrow so there isn't much room to work making it was a bit difficult to access the mounting screws.

followed video instructions... only thing done differently was to tape crusher blades together before removing from shaft and added a drop of sewing machine oil to all screw sockets before replacing to reduce rusting and create greater ease of removal if further repairs needed

Really couldn't be easier. Loosen 3 screws that are easy to find. Disconnect the quick connect wiring harness. Now you have the old unit out. Take out the wire that tells if there is too much ice from the old unit and put it on the new one ( this was the hardest part of the project) Hook up the new wiring connector and hook it on the screws and tighten it up. Viola, your done. No messing with the water. Took me 5 minutes and I've never done it before.

checked the close and open switch on front door first

I watched the installation video and did just like it said. It was pretty easy. My ice maker is working once again, and I'm pretty proud!