Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 4KSRF36DTX1

4KSRF36DTX1 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for 4KSRF36DTX1

If you know the refrigerator repair part you need, you can browse the list of all parts on the 4KSRF36DTX1, or you can search by name or part description. You can also find your part by where it is located on the 4KSRF36DTX1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 4KSRF36DTX1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$65.25

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Order within the next 7 hrs and your part ships today!
$19.27

Ice Bin Auger Drum

This white ice bin auger drum comes with a washer.

Order within the next 7 hrs and your part ships today!
$7.40

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

Order within the next 7 hrs and your part ships today!
$46.85

Evaporator Fan Motor Kit

This refrigerator evaporator fan motor kit comes with a wiring harness and a four-inch push on fan blade.

Order within the next 7 hrs and your part ships today!
$31.47

Roller and Eyelet - Kit of 2

Order within the next 7 hrs and your part ships today!
$5.00

Plastic Tubing Inserts - 4 Included

These inserts are used with 1/4 inch plastic tubing.

Order within the next 7 hrs and your part ships today!
$112.86

Door Gasket - White

Can be used for fresh food or freezer door.

Order within the next 7 hrs and your part ships today!
$14.88

Ice Dispenser Guide

Order within the next 7 hrs and your part ships today!
$13.70

Nut Assembly

This nut and insert assembly is used for plastic water lines in refrigerators.

Order within the next 7 hrs and your part ships today!
$17.97

Lever Spring

Order within the next 7 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No ice

  • Customer: Daniel from Suwanee, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 429 of 510 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more

Plastic bits dispensed from Ice Dispenser in Door

  • Customer: john from seaford, VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set
  • 160 of 173 people found this instruction helpful
Removed Ice bin from Fridge

Removed all bolts on bin with nut driver...about six

Removed housing...be careful with spring on crusher/cube control rod

Removed C clamp on end of auger with small slotted screw driver and needle nose pliers.

Removed plastic nut on end of auger shaft

Removed Ice crusher jaws ... read more

Ice Maker stopped working

  • Customer: Robert from Port Washington, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 110 of 127 people found this instruction helpful
With socket wrench un-screwed the 3 screws and pulled out the ice maker assembly.

Pulled off white plastic end-cap and noticed the plastic gear disk had snapped off (sub part # R0167202)

However, it is all-one-part of the motor assembly unit # w10190935 (part # PS2341896) which must be ordered as a complete part.

Unscrewed t... read more