Models > 4KPCG100PM0

4KPCG100PM0 KitchenAid Coffee Grinder - Overview

Get Parts and Repair Help for 4KPCG100PM0

If you know the coffee grinder repair part you need, you can browse the list of all parts on the 4KPCG100PM0, or you can search by name or part description. You can also find your part by where it is located on the 4KPCG100PM0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your coffee grinder. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$28.75

Coffee Ground Jar

BURR

$29.91

JAR

$28.25

SUPPORT

$19.67

GUARD

KNOB

SEAL

HOLDER

$11.79

COVER

Lid, Bean Jar

Common Symptoms of the 4KPCG100PM0 [Viewing 1 of 15]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Safety guard broke and clogged feed port.

  • Customer: Mike from Coatesville PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 2 people found this instruction helpful
Removed plastic guard on underside of grinder.
Loosened two screws holding guard from underneath.
Replaced guard and replaced screws.
use tape on screws to hold while lining up blind. read more

Grind selector knob was smashed into pieces during shipment

  • Customer: MARY-ANN M from NORTH CAOE MAY NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
All I had to do was remove the retainer screw with the allen wrench then put the knob in place and replace the retainer screw with the allen wrench. It took me longer to locate my allen wrench in my toolkit than to make the repair. read more