Models > 4KFPM770CR0

4KFPM770CR0 KitchenAid Food Processor - Overview

Get Parts and Repair Help for 4KFPM770CR0

If you know the food processor repair part you need, you can browse the list of all parts on the 4KFPM770CR0, or you can search by name or part description. You can also find your part by where it is located on the 4KFPM770CR0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your food processor. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 4KFPM770CR0 [Viewing 2 of 2]


Work Bowl - Clear with Black Handle

Used with Food Processors.


Multipurpose Blade

Used with Food Processors.


Bowl Cover - Clear with Black Handle


Motor Shaft Sleeve

Used with food processors.


Double Food Pusher


Mini Blade


Seal, Oil


Chef`s Bowl




Mini Bowl

Common Symptoms of the 4KFPM770CR0 [Viewing 1 of 10]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Food Processor shaft sleeve crackeda

  • Customer: Roger from Ocate NM
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 16 people found this instruction helpful
Removed the broken shaft by beaking it. Cleaned the metal shaft and coated it with light lubricant. Drove the new shaft on with a rubber mallet.

Would have been helpful to know if there is an easier way to remove the sleeve other than breaking it apart. In this case the sleeve was in bad shape and there was no problem with the new one. Howeve... read more

bowl cover broken, safetey switch, would not allow power to unit

  • Customer: RONALD from ROSSVILLE GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 11 people found this instruction helpful
Customer service very helpful, part shipped that day. I recived part next day. I replaced bowl cover and we used the food procseor for Sunday Fund rasier meal for the youth read more

the motor shaft sleeve cracked

  • Customer: Christine from Prescott Valley AZ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
First I chiseled the cracked and damaged sleeve with a flat head screwdriver until it was off of the steel shaft. Then I put some lubricant on the steel and hammered the new part on with the mallet. It was so easy! I had this broken Cuisinart food processor in my pantry for months, I thought I would have to get a new one. I stumbled upon this website looking... read more