Models > 4KFP750WH0 > Instructions

4KFP750WH0 KitchenAid Food Processor - Instructions

All installation instructions for 4KFP750WH0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the food processor repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 4KFP750WH0
1-6 of 6
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Food Processor shaft sleeve crackeda

  • Customer: Roger from Ocate NM
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 11 of 12 people found this instruction helpful
Removed the broken shaft by beaking it. Cleaned the metal shaft and coated it with light lubricant. Drove the new shaft on with a rubber mallet.

Would have been helpful to know if there is an easier way to remove the sleeve other than breaking it apart. In this case the sleeve was in bad shape and there was no problem with the new one. However, had I been able to keep the damaged one as a back up it might prove helpful

Broken Part

  • Customer: Kathleen from Laingsburg MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 11 people found this instruction helpful
The part was shipped with LIGHTENING speed!! So pleased! The part was readily available and so easy to order!
Thank you! I'll be back!

the motor shaft sleeve cracked

  • Customer: Christine from Prescott Valley AZ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
First I chiseled the cracked and damaged sleeve with a flat head screwdriver until it was off of the steel shaft. Then I put some lubricant on the steel and hammered the new part on with the mallet. It was so easy! I had this broken Cuisinart food processor in my pantry for months, I thought I would have to get a new one. I stumbled upon this website looking for something else and found the replacement part, it saved me hundreds. Thanks PartSelect!

the shaft cracked in half

  • Customer: Francine from Livingston MT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just put it on the shaft adapter

missing atachment

  • Customer: manfred from spring valley CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
installed attachment as needed

Old work bowl was broken. Bought a new work bowl for the food processor

  • Customer: Brigitte from Ann Arbor MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
There was no repair.The new bowl fit perfectly on the machine.
All Instructions for the 4KFP750WH0
1-6 of 6