Models > 4KFP740WH0 > Instructions

4KFP740WH0 KitchenAid Food Processor - Instructions

All installation instructions for 4KFP740WH0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the food processor repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 4KFP740WH0
1-9 of 9
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

work bowl has interlock for power switch

  • Customer: BARBARA from RODNEY MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
The old one broke. I ordered a new one and put it on the food processor. Bingo! Back in business.

Broken Part

  • Customer: Kathleen from Laingsburg MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 12 people found this instruction helpful
The part was shipped with LIGHTENING speed!! So pleased! The part was readily available and so easy to order!
Thank you! I'll be back!

Work Bowl on Food Processor broke

  • Customer: Linda from The Woodlands TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
The site was easy to navigate. I quickly found the part that I needed to replace, ordered it, and it was here in just a few days and I was able to use my Kitchenaid Food processor again. I will definately use this site again for any appliance parts I need. Much less expensive than replacing small appliances!

The cheap plastic bowl and parts do not hold up to even limited use.

  • Customer: Robert from Plano IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
I needed to replace the entire bowl. There was no repair.

Warped Sleeve & broken blade

  • Customer: Ellen* from St Helena Island SC
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I used 3, 3/4" x 2" x 4" blocks of wood (to protect the motor housing) and a carpenters 6" pry bar to remove the broken blade and the shaft sleeve from the shaft; 1st one side then the other side until the damaged sleeve was off. Cleaned the shaft with steel wool , vacuumed out the steel wool and applied a coating of light oil on the shaft. Using a rubber mallet I gently tapped the sleeve in to place. The new blade then just dropped into place.

Broken Large Bowl & Extension Shaft

  • Customer: Stephen from Omaha NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered a new large bowl from Partselect and replaced the broken bowl. The bowl fit perfectly and works very well. I also replaced a broken extension stem with a replacement stem from Partselect, and that worked well for about week, then it too also broke the same way the original did. Perhaps the item was just not meant to handle shredding cheese.

the shaft cracked in half

  • Customer: Francine from Livingston MT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just put it on the shaft adapter

missing atachment

  • Customer: manfred from spring valley CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
installed attachment as needed

The handle to my work bowl broke

  • Customer: Jennifer from Las Vegas NV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered a replacement work bowl and now my food processor works again!
All Instructions for the 4KFP740WH0
1-9 of 9