Models > 4KFP710WH1 > Instructions

4KFP710WH1 KitchenAid Food Processor - Instructions

All Instructions for the 4KFP710WH1
1 - 15 of 28
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replacement bowl for Kitchenaid 7 cup food processor
Replaced broken bowl. The locking mechanism is not sturdy on the original and breaks in the bowl handle. If this replacement lasts, I will be happy because I really like the processor.
Parts Used:
Work Bowl
  • Paula from Sarasita, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
145 of 155 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bowl of food processor needed replacing
replaced bowl of food processor :)
Parts Used:
Work Bowl
  • Sonia from Alamogordo, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
30 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The handle on our bowl had broken at the latch
This bowl fit perfectly and was a much cheaper alternative to buying a new Kitchenaide food processor. No assembly simply switch the bowls out.
Parts Used:
Work Bowl Shaft and Disc Adapter
  • Tobin from ROBINS, IA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic pin meant to insert into the processor when the bowl is snapped in place
(and thus enables the machine to process food), was not springing into its intended orifice. I tried to repair my original bowl but couldn't. For $18 I was able to save my favorite kitchen appliance. Thank you! Just had to swap the broken work bowl for the new one I ordered from your establishment. No disassembly required. Incredibly easy.
Parts Used:
Work Bowl
  • Simone from ABERDEEN, ID
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Work bowl lever broke.
Easy peasy. Just use the new bowl.
Parts Used:
Work Bowl
  • Donna from UNIVERSITY PL, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken bowl
Replaced broken bowl with new bowl.
Parts Used:
Work Bowl
  • Linda from OCEAN SPRINGS, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke the bowl of the food procressor and needed a new one
Just took the old one out and put this one in. It was perfect. Just like the one that the food processor came with.
Parts Used:
Work Bowl
  • Linda from BROADVIEW HTS, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken latch on old bowl
no brainer, just install bowl
Parts Used:
Work Bowl
  • Robert from LIVERMORE, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original work bowl broke
Unwrapped new work bowl, set in place. Ta-da!
Parts Used:
Work Bowl
  • Jordan from Peachtree City, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Kitchen Aid Food Processor Work bowl broke.
No repair involved, just replacement. I am delighted to receive the bowl after a long wait. I tried several parts sales on line and they were all showing either back-order or out of stock. Getting more frustrated, I ended up purchasing a re-conditioned food processor, same make. Now with the new bowl received from PartSelect I have a backup if the work bowl becomes damaged again.
Parts Used:
Work Bowl
  • Betty from Golden Valley, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
original bowl broke to pieces at handle
replace entire bowl
Parts Used:
Work Bowl
  • Qian from Oakland, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Work bowel broke
Purchased a new bowel from Part Select
Parts Used:
Work Bowl
  • Thomas from Rapid City, SD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The locking mechanism on the work bowl broke while shredding cheese. This is the second time in 3 years that this part had to be replaced.
Easy enough to order and quick delivery, even with holiday shipping. Possible design flaw?
Parts Used:
Work Bowl
  • Janice from Arlington, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Food processor didn't operate when food processor plugged in and on button pressed.
No repair needed, a part on original work bowl must have broken, so bowl wouldn't lock properly to base and processor wouldn't operate. Replacement bowl fixed the problem right away. Thank you!
Parts Used:
Work Bowl
  • NANCY from LAKE IN THE HILLS, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The handle of the original bowl was broken.
No repair....just a new bowl. Very pleased though with this company....fast delivery and half the price of going through Kitchen Aid.
Parts Used:
Work Bowl
  • Linda from Orlando, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 4KFP710WH1
1 - 15 of 28