Models > 4KCG200MC0 > Instructions

4KCG200MC0 KitchenAid Coffee Grinder - Instructions

All installation instructions for 4KCG200MC0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the coffee grinder repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 4KCG200MC0
1-4 of 4
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Coffee mill needed a new jar

  • Customer: Kathleen from Basking Ridge NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 7 people found this instruction helpful
We needed a new jar for the coffee mill. This was excellent service & very fast shipping!

Grinder sounded like a jackhammer

  • Customer: Scott from Grafton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 1 of 2 people found this instruction helpful
Nut holding guard washer (keeps coffee from bouncing into glass container) came loose.

Nut came loose and bent in grinder

  • Customer: Gilda from Alexandria VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 1 people found this instruction helpful
Very carefully

Worn burr on coffee mill purchased at garage sale

  • Customer: Glen from Dayton OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 17 people found this instruction helpful
As per instructions: Empty coffee hopper and remove. Remove set screw at rear of coffee mill. Unscrew grind adjustment ring and remove from base. Lift burr-shaft assembly out of motor housing. Replace with new burr-shaft assembly. Replace grind adjustment ring and tighten, then back off one-half turn. Replace set screw and tighten.
All Instructions for the 4KCG200MC0
1-4 of 4