4KCG200ER0 KitchenAid Coffee Grinder - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Coffee mill needed a new jar
We needed a new jar for the coffee mill. This was excellent service & very fast shipping!
Parts Used:
-
Kathleen from Basking Ridge, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
12 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn burr on coffee mill purchased at garage sale
As per instructions: Empty coffee hopper and remove. Remove set screw at rear of coffee mill. Unscrew grind adjustment ring and remove from base. Lift burr-shaft assembly out of motor housing. Replace with new burr-shaft assembly. Replace grind adjustment ring and tighten, then back off one-half turn. Replace set screw and tighten.
Parts Used:
-
Glen from Dayton, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
11 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grinder sounded like a jackhammer
Nut holding guard washer (keeps coffee from bouncing into glass container) came loose.
Parts Used:
-
Scott from Grafton, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Nut came loose and bent in grinder
-
Gilda from Alexandria, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Need more parts!
I thought I was getting both the to burr and the bottom however I just got the bottom set!
Parts Used:
-
charles from WALNUT CREEK, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!