Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 4ET18NKXFW02

4ET18NKXFW02 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 4ET18NKXFW02

If you know the refrigerator repair part you need, you can browse the list of all parts on the 4ET18NKXFW02, or you can search by name or part description. You can also find your part by where it is located on the 4ET18NKXFW02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 4ET18NKXFW02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 4ET18NKXFW02

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.20

Touch-Up Paint - White

18ml

$35.17

Light Socket Kit

The bulb is sold separately.

$11.64

Ice Pan

This part may come in white or clear plastic, but either will still work and fit properly in your appliance.

$100.45

Fresh Food Door Gasket

This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$11.07

Spray Paint - 12 oz. - White

$61.59

Door Handle Kit

This kit includes both the refrigerator and freezer door handles. Screws NOT included.

$6.60

Touch-up Paint - Black

16ml

$88.58

Freezer Door Gasket

This door gasket is used to seal the freezer door when closed.

$92.16

Temperature Control Thermostat Kit

This part keeps the refrigerator at a constant temperature.

$8.45

Insert Kit

This kit comes with two pieces.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 67 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS, MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 48 of 55 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more

The rubber piece around it was worn out

  • Customer: Carmen from Albany, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 24 of 31 people found this instruction helpful
We just had to find the trick to put it in where it would catch on and the rest was a piece a cake.

You had to put it in the groove where it would catch and snap it in place and the rest went in
pretty easy. read more