Models > 4ET14GKXFW00

4ET14GKXFW00 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 4ET14GKXFW00

If you know the refrigerator repair part you need, you can browse the list of all parts on the 4ET14GKXFW00, or you can search by name or part description. You can also find your part by where it is located on the 4ET14GKXFW00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 4ET14GKXFW00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 4ET14GKXFW00 [Viewing 5 of 5]

$3.76

Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.

$90.45

Add-On Icemaker Kit

This kit includes ice bucket and water valve and fits Whirlpool models manufactured from 1993 to present.

$3.96

End Cap Trim Piece

$8.37

Light Rocker Switch

$5.54

Touch-Up Paint - White

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$4.06

End Cap Trim - White

$29.50

Door Shelf Trim

This door trim is located on the inside of the fridge/freezer door. It is held in with two end caps, and is used to store items in the door.

$3.96

Door Hinge Nylon Washer

$71.80

Glass Shelf Insert

This glass shelf doubles as a crisper pan cover.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken elbow on icemaker water fill tube.

  • Customer: Charles from Orland Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 64 of 70 people found this instruction helpful
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done. read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 34 of 41 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Wanted to install ice maker in my freezer

  • Customer: Donald A. from ORLANDO FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 25 of 40 people found this instruction helpful
I was clening my uprght freezer and noticed that it was preped for an icemaker. I first went to the Whilpool website and could not find my part as my freezer was a 2008 model.

I saw PartSelect on the search page and went to thier site.
I put in my modle number of the Whilpool Ice maker kit that was on the back of my freezer. PartSelect had th... read more