Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 4ED22DWXTM00

4ED22DWXTM00 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 4ED22DWXTM00

If you know the refrigerator repair part you need, you can browse the list of all parts on the 4ED22DWXTM00, or you can search by name or part description. You can also find your part by where it is located on the 4ED22DWXTM00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 4ED22DWXTM00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 8 hrs and your part ships today!
$65.25

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Order within the next 8 hrs and your part ships today!
$19.27

Ice Bin Auger Drum

This white ice bin auger drum comes with a washer.

Order within the next 8 hrs and your part ships today!
$16.79

Door Closing Cam Kit

This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.

Order within the next 8 hrs and your part ships today!
$40.25

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forc...

Order within the next 8 hrs and your part ships today!
$7.40

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

Order within the next 8 hrs and your part ships today!
$30.14

Dual Outlet Valve Kit

This part comes with several mounting brackets and plastic unions.

Order within the next 8 hrs and your part ships today!
$18.18

Shelf Support Stud - White

This kit contains two options - One that is a push and turn and the other that is a screw in.

Order within the next 8 hrs and your part ships today!
$35.17

Light Socket Kit

The bulb is sold separately.

Order within the next 8 hrs and your part ships today!
$7.22

Touch-Up Paint - White

18ml

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No ice

  • Customer: Daniel from Suwanee, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 430 of 511 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more

inconsistent compressor and condensor fan operation

  • Customer: Steve earney from Brooks, GA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 219 of 229 people found this instruction helpful
Compressor start relay would cycle several times before compressor would come on. Replaced start relay and defrost timer assy. Operated more consistently however not completely reliable. Ice would begin to melt. Noticed that if you would cycle the temperature control the compressor would start again and operate for several hours then not cycle again. Jum... read more

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 172 of 190 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more