Models > 4ED20ZKIFN01

4ED20ZKIFN01 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 4ED20ZKIFN01

If you know the refrigerator repair part you need, you can browse the list of all parts on the 4ED20ZKIFN01, or you can search by name or part description. You can also find your part by where it is located on the 4ED20ZKIFN01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 4ED20ZKIFN01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.96

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

$53.86

Meat Pan with Handle

$59.77

Crisper Pan

$4.11

Door Cam

$2.70

Screw

This screw is sold individually.

$15.10

Shelf Support Stud - White

This kit contains two options - One that is a push and turn and the other that is a screw in.

$3.96

Door Shelf Retainer Bar End Cap - Left Side

This white door shelf retainer bar end cap is sold individually. Use it for the left side of your refrigerator door shelf retainer bar.

$31.33

Bi-Metal Defrost Thermostat

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

$3.96

Door Shelf Retainer Bar End Cap - Right Side

$20.61

STUD-SHELF

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Refigerator door was not closing all the way if not pushed shut.

  • Customer: Norbert from Sugar Land TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 88 of 90 people found this instruction helpful
Remove the top hinge cover. Removed the top hinge support. Lifted the door from the bottom support. Old door cams were worn completly flat. Replaced the lower door cam and closing cam use a little vasalene for lubricant on the cam surfaces. Placed the door back on the lower hinge support. Replaced the top hinge support. Door is closing great now. read more

Fridge was getting too warm, ice buildup on coils.

  • Customer: Cathy from Winter Park FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 69 of 76 people found this instruction helpful
WARNING: REPLACING THIS PART REQUIRES CUTTING AND SPLICING ELECTRICAL WIRES. RISK OF ELECTRICAL SHOCK OR FIRE. DO NOT ATTEMPT THIS REPAIR IF YOU ARE NOT EXPERIENCED WITH ELECTRICAL WIRING.

Part Info:
The bi-metal strip is clipped onto the evaporator coils and is designed to regulate the defrost coil temperature. If it is not functioning prope... read more

The studs to hold the shelf were broken

  • Customer: Pavel from Norwalk CT
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 34 of 39 people found this instruction helpful
The hardest part was to figure out how to remove the old studs and put in new ones. I figured out finally that they should be twisted out and in., Simple online or printed insruction would be very helpful. Unfortunatelly the manual does not contain any repair information.
I fixed it with little trouble. read more