Models > 4AD50J0 > Instructions

4AD50J0 Whirlpool Dehumidifier - Instructions

All installation instructions for 4AD50J0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dehumidifier repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 4AD50J0
1-4 of 4
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the dehumidifier was not shutting off when water level was full

  • Customer: Steven from Owings Mills MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 6 people found this instruction helpful
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy

Broken Floar Arm

  • Customer: Stephen from University City MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 1 of 5 people found this instruction helpful
Cut off Clips. Replace Float. Replace Clips

Bucket water level switch broken

  • Customer: Bert from Winston-Salem NC
  • Difficulty: Very Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I ordered the part and, unfortunately, it was the wrong part and did not fit so I had to modify it to make it fit and finally installed it. The good news is that it works.

Push on connectors and switch housing were different

  • Customer: Lester from Brazil IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The switch housing was not exactly the same for easy snap in. I removed the actual switch and installed it into the old housing. Then I found that the male pins were larger than the old ones. I chose to clip off the female connectores, strip the wires, and solder the wires to the pins on the switch. It was easier for me than attempting to change the push on connectors. For me, the actual switch was what I wanted and I fixed it my way. It was easy to do however some folks may want to change the push on connectors. Works great and saved me hundreds of dollars. Thanks.
All Instructions for the 4AD50J0
1-4 of 4