Models > 49-2848-23-04 > Instructions

49-2848-23-04 Tappan Dryer - Instructions

All Instructions for the 49-2848-23-04
361 - 375 of 394
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
thin cloth materials getting stuck between drum edge, leaving rust marks.
lifted up the top after releasing 2 catches with the putty knife, removing front panel, held in place with 2 screws. Scrape off top felt strip with the worn teflon tabs. Wire brush off old glue. Apply glue provided.(thin coating). install new felt strip. let the glue dry for a few minutes, reinstall, and you are done.
Parts Used:
Upper Drum Glide
  • paul from howell, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken drive belt
Raised the lid, removed 2 little screws,slipped the front panel off, disconnected the safety switch, vacuumed everything, slipped on the drive belt and reversed my way out. It was way more easy than filling a grease gun!
Parts Used:
Drum Belt
  • Thomas from Woodland, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Broken belt
Remove drum, replace belt, return drum
Parts Used:
Drum Belt
  • John from Minot, ND
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Cut belt
I followed the vidio from yor web site it was great without it i would still be trying to get done.
Parts Used:
Drum Belt
  • gary from little torch key, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Needed a new lint screen, that's all.
I got my order THE DAY AFTER I ORDERED IT!!!! I didn't expect that. If you can use a screwdriver you can install it. I would use this company again for anything I needed like this. Great service!!!!!
Parts Used:
Lint Screen and Frame
  • Jillian from Columbus, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
lint screen was torn
I removed two phillips head screws, lifted out the old screen and frame, dropped the new frame and screen in place and replaced the two screws. Total time to repair was less than 90 seconds.
Parts Used:
Lint Screen and Frame
  • clinton from rogersville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The Dryer would not lite
Took the coils off and put the new one on thats all
Parts Used:
M Series Ignition Coil Kit
  • Thomas from Hixson, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
clothes getting caught around drum leaving marks on them
took front off machine removing screws. Removed old felt and cleaned old glue off making sure area was clean. applied new glue and then new felt drum glide. put fish sringer around complete drum pulling tight clamping with vise grips till dry. then put front back on machine.
Parts Used:
Upper Drum Glide
  • Michael from Lucas, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
dryer belt broke
Installed just like the video described and it went quite well. The part arrived in a short amount of time and the belt was exactly what I needed.Thank you I will visit your web site again. A very satisfied customer. :) Veronica G.
Parts Used:
Drum Belt
  • Veronica from Grand Ledge, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
A loud squeeling sound
Had the macnine apart before ordering the Bearing Assembly. Reading other comments convinced me to order the Bearing Assembly. Parts were shipped very quickly after ordering and following the instructions on the web site things went back together easily.
Parts Used:
Rear Drum Bearing Kit
  • Delbert from Grass Valley, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer was squeaking loudly.
followed the video instructions....easy as pie. Glad i bought the belt too....the belt on my dryer was very worn. Changed the bearing with the kit. Very easy to do. The whole job was done in an hour and a half....back together and running without the squeak. Glad i repaired instead of buying a new dryer. Next time i have a problem with an appliance, i will be checking PartSelect first.
Parts Used:
Drum Belt Rear Drum Bearing Kit
  • Tim from Sulphur, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The dryer was squeaking loudly and cloths were getting caught between the frame and drum and burning.
I watched the videos provided on this website and followed the instructions in the order confirmation e-mail. These were both very helpful
Parts Used:
Upper Drum Glide Rear Drum Bearing Kit
  • Timothy from Kittery, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
loud metal on metal noise
Replaced rear bearing on back of dryer. Repair cost $20.00 an a little time. Much better then buying a new dryer. It was easy to repair the video instructions were great. I would do it again it needed.
Parts Used:
Rear Drum Bearing Kit
  • richard from orchard beach, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer Squeaking
Found instructions on "UTube"some of the screws were in a different position but you can see them. While you have the dryer apart it's a great time to clean it and also as long as you've gone this far replace the belt,it's probably time.
Parts Used:
Rear Drum Bearing Kit
  • Gilbert from Elizabethtown, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
I shut the door too hard, and the old latch fell down into the inside of the dryer.
The new latch easily snapped it into place.
Parts Used:
Door Catch
  • Bret from Tampa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 49-2848-23-04
361 - 375 of 394
Back to Top