All Installation Instructions for Hoover Range 4875

parts fine,

just inserted in to proper place

Parts Used:

Grease Filter

MARY from ELK RIVER, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

front burner would only work on high

Installed the part------very easy

Parts Used:

Surface Unit Infinite Switch Kit

william from cairo, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

bake element not heating up

removed element and tested wirh ohm meter. No reading telling it was bad. Tested voltage from supply wires. Voltage correct. Ordered new element which can in 2 days. Installed-tested- problem solved. 2 scres connect element.

Parts Used:

Bake Element with Screws

john from chatham, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven element burned out

The only trouble I couldn't remove the screws that held the wires to the element, so I cut the wires as close to the end as possible and attached new hardware. After that was done it was simple to reinstall the new element. Turned the power back on. Turned the oven on and it worked like new.

Parts Used:

Bake Element with Screws

Eugene from Satellite Beach, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I Destroyed My Grease Filter In The Dishwasher And It Just About Disintergrated.

I just had to drop the grease filter into the slot. It took less than a second. But what I am really pleased with is that it took less than a day and a half to get the part. I ordered it on thursday morning. It was shipped on thursday afternoon and in my driveway by friday noon!!! Wow!!! How great was that!!!!!! The fastest service I've every had for anything!! Bravo!!!!!!!! To all your workers!!!!! Rrm

Parts Used:

Grease Filter

Rosetta R. from Jamaica Plain, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

In cleaning the cooktop water/cleaner leaked into the fan switch. This blew the switch.

First, electricity was shut off from stove. Then two screws that holds the element into place was removed. I pulled element out about 3to8 inches and disconnected the wires to the damaged rocker switch. A new rocker switch was installed. Replaced element back into position and replaced the two screws. Job was finished within 10-15 minutes.

Parts Used:

Rocker Switch - White

Dolly from Cumberland, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The filter in the grill section of my stove fell apart.

I simply removed the old filter and replaced it w/the new filter. It came in record time and I'm very pleased w/the service I received.

Parts Used:

Grease Filter

Beth from Dunkirk, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the original grease filter was worn and falling apart

Removed the old filter from the top of stove and put the new one in. Took about 10 seconds.

Parts Used:

Grease Filter

Barbara from Medfield, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

lower element was burnt out

same as your example

Parts Used:

Bake Element with Screws

JOSEPH from WARRENTON, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Surface burner did not heat

I ordered part one day, recieved part the next day. I installed it the next day. It worked perfect. THANK YOU!

Parts Used:

Surface Unit Infinite Switch Kit

james from Santa Claus, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

Both burners would come on when you turn on the back larg back burner.

Replaced surface unit infinite switch

Parts Used:

Indicator Light Kit

Surface Unit Infinite Switch Kit

Jerry from Tallahassee, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

grill would not get hot enough

I have a newer jenn air with the 3 prong elements. The original element was 3 prong 1900W only using one of the controls. Since the stove socket would accommodate 4 prongs I looked up the part for the older stoves (PS2357533)which had 2 elemants using both controls. The element plugged right in and I now have high heat like on my older models and it now grills like it should instead of just heating the stuff up. Highly recommended. One caution you will need a metal piece to support the element since the newer stoves do not use the metal bricketts with supports.

Parts Used:

Grill Element

Paul from Berlin, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Could not read numbers on the knobs

Simply pull off the old ones and replace with the new ones. Problem was finding the correct knobs with the double "s" shaft fitting.The item number indicated by the model number was incorrect. I saw a kit with four knobs on your web site and ordered the kit and not the recommended item. Turned out to be the right move and the knobs fir just fine.

Parts Used: