Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 46-2837-00-02 > Parts

46-2837-00-02 Tappan Washer - Parts

All parts for the Tappan Washer 46-2837-00-02

Below is a list of all parts for the Tappan Washer 46-2837-00-02. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 46-2837-00-02
1-14 of 184
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.91

Water Inlet Valve

The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the...

$29.66

High Temperature Adhesive

This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before applying the adhesive, ensure that the area is completely clean from any debris and is dry. You may wish to use small clamps to hold the material in place while it dries. If the felt has come loose or broken apart, this may cause your dryer to make loud noise, indicating that new felt or rubber needs to be glued into place. Use gloves to apply glue.

$8.24

Touch Up Paint - White

This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear....

$8.47

Upper Spin Bearing Washer

The upper spin bearing for a washer can solve many issues such as loud and odd noises, or leaking water. Replacing the spin bearing could solve these issues. The tools needed for this replacement are screwdrivers, a socket set, and a putty knife. To repair, first lift the top of the washer and remove the screws at the bottom of the front panel to pull away. Next, pull off the dispenser cover, cup, and agitator. Detach switch tube from the tub cover and remove tub cover, then use the 1/2 inch socket to remove the trunnion bolts and pull out inner tub. For the rest of the installation instructions, refer to the diagram provided by the manufacturer. Remember to unplug the appliance from the power source as a safety precaution.

$5.13

Single Tub Cover Clip

$8.47

SPRING

$13.60

Leveling Leg

Sold individually.

$7.00

Fill Hose Washer

1 per package.

$22.31

CLAMP

$7.44

Idler Pulley C-Clip

$32.69

Rotary Knob - Chrome

Sold individually.

$12.97

Trunnion Plate

Locking Plate.

$9.74

BOLT

Holds plated on Trunion .312-18 x 1.625.

$33.31

SEAL

All Parts for the 46-2837-00-02
1-14 of 184