Models > 3ZMED5705TW0 > Instructions

3ZMED5705TW0 Maytag Dryer - Instructions

All Instructions for the 3ZMED5705TW0
706 - 720 of 836
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
dryer not heating
after replacing my heating element, my dryer still wasn't heating. So i replaced the thermal cut-off unit. from ease of finding the part, to ordering and the instructional videos...this was a no-brainer.thanx guys!!
Parts Used:
Thermal Cut-Off Kit
  • Stephen from Hollywood, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Belt
PartSelect sent the exact right part, and very quickly! YouTube showed me how to install it. The only hard part was the bulkiness of the drum, which is why I marked "a bit difficult" for the repair.
Parts Used:
Multi Rib Belt - 92-1/4"
  • Patricia from Durham, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lint filter handle broke
Slid the new lint filter into slot on top of my 26 year-old Kenmore dryer and it fit perfectly! Ordered part and received it the next day...unbelievable!! Definitely A+ service.
Parts Used:
Lint Filter
  • Joan from Dudley, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken belt
the video was very helpful
Parts Used:
Multi Rib Belt - 92-1/4"
  • Robert from Winchester, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replaced lint filter
The part was delivered when promised. Part was a perfect fit. I was very pleased with the entire process.
Parts Used:
Lint Filter
  • Robert from Palatka, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Won't tumble
Watched how-to video provided on PartSelect website. Most time was spent cleaning out the cabinet of lint and other debris. I found over 5 bucks in loose change! I Found pulling the belt over the motor pulley to be the trickiest. Note: my dryer will be 30 years old come this September. I wonder how many more years I'll get out of it!
Parts Used:
Multi Rib Belt - 92-1/4"
  • Robert from Lynn, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
dryer would not stop when my wife close the door
I order the part from you and you had a detail video on how to replace the door switch, and it was on the money, THANK YOU
Parts Used:
Dryer Door Switch
  • cedric from mobile, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
no problems
video describing repair very helpful. just folling it made the repair easy
Parts Used:
Multi Rib Belt - 92-1/4"
  • stephen from boynton beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No heat in dryer
We started with replacing a thermal fuse, went onto heating element & then to replacing the high limit thermostat. The replacements went very easily with your videos, but unfortunately it did not do the job & there is still no heat.
Parts Used:
Dryer High Limit Thermostat
  • Maureen from Manalapan, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lint Filter mesh was frayed.
Purchased a new lint filter. Delivery and installation were no problems. The easiest repair that I've ever done.
Parts Used:
Lint Filter
  • Christian from Battle Creek, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The door Switich on our dryer had broke, and we were using something to push the broken swich enough to get the dryer going. We could not find the piece we needed so I went to PartSelect and it was so easy finding what I needed I put in the Model number and looked and there it was. I called and ode
We usedthe instructions that PartsSelect offered. Unscrewed the top in the back of the dryer lifted it up and replaced the part. A Lot cheaper than calling a repairman...
Parts Used:
Dryer Door Switch
  • Rebecca from Hartsville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken Dryer belt
Can't stop laughing about the mistake I almost made, before I even looked on internet I called Sears and scheduled a repair appointment, $80.00 just to have someone come out and tell me what my problem was not to repair it but to tell me whats wrong. And I told them the belt had broken I heard it when it snapped. Long story short version I found your website and entered appliance information, found part for $15.00 but also found on-site video clearly making the needed repair. Clear step by step instructions taking only 8 minutes looked very easy so I took a chance ordered the part two days later part arrived so I went into basement armed with laptop and tools. MAN it was easy.... too easy ....worked out fine video was spot on. Thanks you guys are a great company
Parts Used:
Multi Rib Belt - 92-1/4"
  • Leon J Swain from Washington, DC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken clothes dryer door switch
I am a 75 year old woman who always had servicemen do the repairs that needed to be done in my home. However, living on Social Security I needed to reduce my expenses. I watched the video of how to replace the part and determined I could follow them easily. Within a short time the door switch was installed and the clothes dryer started working at the push of the on button.
Parts Used:
Dryer Door Switch
  • Rose from Waxahachie, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Changing door switch
Easy repair once you locate the problem. The video is really helpful.
Parts Used:
Dryer Door Switch
  • Joan from Biscayne Park, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dryer would run when you open door
wow took less than 15 minutes to change switch watched online video was so easy change thanks lot
Parts Used:
Dryer Door Switch
  • jose from miami, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3ZMED5705TW0
706 - 720 of 836
Back to Top