Models > 3XKVN600F00

3XKVN600F00 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 3XKVN600F00

If you know the refrigerator repair part you need, you can browse the list of all parts on the 3XKVN600F00, or you can search by name or part description. You can also find your part by where it is located on the 3XKVN600F00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 3XKVN600F00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.20

Door Shelf End Cap - Left or Right Side

Sold Individually.

$8.59

Light Rocker Switch

This light switch is triggered by the door opening and closing.

$35.51

Door Shelf Retainer Bar

End caps are sold separately.

$4.34

End Cap Trim Piece

Sold individually.

$18.39

Light Socket Kit

The bulb is sold separately.

$2.07

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$5.05

Touch-Up Paint - White

18ml

$4.66

SCREW

Sold individually.

$30.86

Roller and Eyelet - Kit of 2

$2.70

SCREW

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 45 of 55 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 32 of 37 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 16 of 19 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more