Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 3XKVN515000

3XKVN515000 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 3XKVN515000

If you know the refrigerator repair part you need, you can browse the list of all parts on the 3XKVN515000, or you can search by name or part description. You can also find your part by where it is located on the 3XKVN515000 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 3XKVN515000 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$11.11

Light Rocker Switch

This light rocker light switch is used in a number of household appliances. It is most often found in refrigerators and freezers. This is a simple mechanism that helps turn the lig...

$3.02

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$33.40

Light Socket Kit

The light socket in your refrigerator houses the light bulb and connects it to the power source. If your refrigerator light is not coming on when you open the door, you may need to...

$2.98

Screw

Sold individually.

$6.24

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...

$31.53

Dairy Compartment Door

This dairy compartment door is located inside the refrigerator. It is used as a protective shield for your dairy products. If the door is broken or one of the mounting tops has broken off, it is best to replace it. To replace it, release the tabs and pull out old dairy door. Next, line up the new one by putting one side onto the peg and then pressing on the other side to flex it, eventually putting the other peg in. Make sure to open and close the shield to test it. Wear safety gloves as a safety precaution and remember to refer to the manual provided by the manufacturer for further installation instructions.

$32.95

Door Trim - White

This door trim is used in refrigerators and is connected to the door handle. If the mounting tap is broken or there is discolouration from usage, it is best to replace this part to...

$5.54

Door Hinge Nylon Washer

$22.68

Front Roller

Sold individually.

$4.63

Hinge Bracket

This part is used to support the hinge.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 73 of 87 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS, MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 56 of 63 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more

The door gasket had worn out and the door wouldn't shut properly

  • Customer: Jo from Hudson, NH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 26 of 31 people found this instruction helpful
We took the edge out of the slot and pulled the old one off then put the new one on. Once we got the plastic edge started into the slot it was a breeze. Only took about 5 minutes. We were very pleased with the results. read more