Models > 3XES0GTKNL00

3XES0GTKNL00 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 3XES0GTKNL00

If you know the refrigerator repair part you need, you can browse the list of all parts on the 3XES0GTKNL00, or you can search by name or part description. You can also find your part by where it is located on the 3XES0GTKNL00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 3XES0GTKNL00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$27.89

Door Bin

Sold individually.

$3.76

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

$3.84

Door Cam

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

$53.86

Meat Pan with Handle

$59.77

Crisper Pan

$57.82

Thermostat Assembly

The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

$27.88

Bi-Metal Defrost Thermostat

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

$2.70

Screw

This screw is sold individually.

$69.50

Shelf Frame with Glass

This part is also known as Cover.

$2.70

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door Bins Broke

  • Customer: Eric from Hamburg PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 369 of 372 people found this instruction helpful
Like always your products were ordered and came extremely fast. The installation was quick. No tools needed this time. Now we have 3 door bins where we had two broken ones. Our refrigerator is more organized than ever. Thanks again! read more

inconsistent compressor and condensor fan operation

  • Customer: Steve earney from Brooks GA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 130 of 133 people found this instruction helpful
Compressor start relay would cycle several times before compressor would come on. Replaced start relay and defrost timer assy. Operated more consistently however not completely reliable. Ice would begin to melt. Noticed that if you would cycle the temperature control the compressor would start again and operate for several hours then not cycle again. Jum... read more

Refigerator door was not closing all the way if not pushed shut.

  • Customer: Norbert from Sugar Land TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 122 of 125 people found this instruction helpful
Remove the top hinge cover. Removed the top hinge support. Lifted the door from the bottom support. Old door cams were worn completly flat. Replaced the lower door cam and closing cam use a little vasalene for lubricant on the cam surfaces. Placed the door back on the lower hinge support. Replaced the top hinge support. Door is closing great now. read more