Models > 3LCHW9100YQ0

3LCHW9100YQ0 Whirlpool Washer - Overview

Get Parts and Repair Help for 3LCHW9100YQ0

If you know the washer repair part you need, you can browse the list of all parts on the 3LCHW9100YQ0, or you can search by name or part description. You can also find your part by where it is located on the 3LCHW9100YQ0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for 3LCHW9100YQ0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.76

Door Strike/Hook

Used to help make the door stay closed.

$2.70

Hose Clamp

$5.54

Touch-Up Paint - White

$20.49

Tub to Pump Hose

$18.05

Dispenser To Tub Hose

$37.14

SHOCK-ABSR

$2.70

Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16

$13.49

Bellow Clamp

$15.69

Bellow to Tub Clamp

$8.17

Spray Paint - 12 oz. - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

the strike hook was broken

  • Customer: david from st petersburg FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 10 of 21 people found this instruction helpful
replacing the hook was simple 2 torx screws. the latch assembly seemed ok I could hear it trying to latch the hook so i just replace the broken hook. read more

Locking the drum for moving

  • Customer: francis from Columbia TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 1 of 1 people found this instruction helpful
Remove the plastic caps from the rear of the machine. Insert the locking bolts into the slots. There is a clip on the bolts with a corresponding hole in the outside edge of the slots, this tells you exactly where to place the bolt. In my case i used a large flat head screw driver to move the drum into alignment with the bolt by inserting the driver into a ... read more