Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 3LCHW9100WQ0

3LCHW9100WQ0 Whirlpool Washer - Overview

Get Parts and Repair Help for 3LCHW9100WQ0

If you know the washer repair part you need, you can browse the list of all parts on the 3LCHW9100WQ0, or you can search by name or part description. You can also find your part by where it is located on the 3LCHW9100WQ0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for 3LCHW9100WQ0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$118.88

Drain Pump - 120V 60Hz

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. It has two ports for water to pass through: ...

Order within the next 9 hrs and your part ships today!
$6.16

Door Strike

Used to help make the door stay closed. Sold individually.

Order within the next 9 hrs and your part ships today!
$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air...

Order within the next 9 hrs and your part ships today!
$22.07

Hose, Tub to Pump

Order within the next 9 hrs and your part ships today!
$6.36

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...

Order within the next 9 hrs and your part ships today!
$13.51

Clamp, Bellow To Tub

Order within the next 9 hrs and your part ships today!
$28.59

Temperature Sensor

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.

Order within the next 9 hrs and your part ships today!
$27.42

Hose, Dispenser To Tub

Order within the next 9 hrs and your part ships today!
$2.98

Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16

Order within the next 9 hrs and your part ships today!
$11.51

Spray Paint - 12 oz. - White

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F 21 error

  • Customer: Andrew from St.Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 268 of 301 people found this instruction helpful
Removed the front panel unplugged
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in. read more

water pump failed

  • Customer: Kurt from Caliente, NV
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 61 of 66 people found this instruction helpful
Pump started making noises like ball bearings grinding. took the lower front cover off pulled the strainer out of the pump housing and found $2.55 in nickles dimes and quarters. Some 223 bullets and about 20 bobby pins. Together they had destroyed the impeller, so ordering a new one and installing it did the trick. Easy installation about 15mins. read more

Replaced Drain Pump on Whirlpool HE Duet Sport Washer

  • Customer: Shawn from Clyde, NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Wrench set
  • 56 of 59 people found this instruction helpful
This do it yourself repair saved me the cost of a repair man's service call plus time to put it in. 1. First of all, make sure the unit is unplugged. On this type of front loading washer you will need to remove the bottom panel, which is secured by 3 nut screws. 2. Once the panel is removed you will need to use pliers to unscrew the drain plug and allow ... read more