Models > 3KUIS185V0

3KUIS185V0 KitchenAid Ice Maker - Overview

Get Parts and Repair Help for 3KUIS185V0

If you know the ice maker repair part you need, you can browse the list of all parts on the 3KUIS185V0, or you can search by name or part description. You can also find your part by where it is located on the 3KUIS185V0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your ice maker. We’ve also included any installation videos we have for 3KUIS185V0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$7.87

Light Rocker Switch

$2.70

Screw

This screw is sold individually.

$3.56

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

$3.96

Compression Nut

$9.17

SCOOP

$4.46

Plastic Tubing Inserts - 4 Included

These inserts are used with 1/4 inch plastic tubing.

$227.43

Ice Grid Cutter

$84.84

Cycling Thermostat

Used in stand-alone ice makers. The cycling thermostat controls the activation of the icemaker ejection cycle.

$77.37

Control Thermostat

This part helps prevent the evaporator from freezing over and also determines the thickness of the ice.

$22.13

Light Bulb Set

Package of 2.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 37 of 45 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

The light switch on the refridgerator broke - no light.

  • Customer: David from Albany OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 25 people found this instruction helpful
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased! read more

Water began to leak under the refrigerator. Source looked like it was coming from control valve suppling water to ice maker and water dispenser.

  • Customer: jesse from hacienda heights CA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 7 of 9 people found this instruction helpful
Followed instructions supplied. It was relatively easy and the parts fit exactly right. Sears wanted twice as much for the part and service would have charged me another $100 to come to my home. I saved over $100 doing the project myself. read more