Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 3ET22DKXFW01

3ET22DKXFW01 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 3ET22DKXFW01

If you know the refrigerator repair part you need, you can browse the list of all parts on the 3ET22DKXFW01, or you can search by name or part description. You can also find your part by where it is located on the 3ET22DKXFW01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 3ET22DKXFW01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.20

Touch-Up Paint - White

18ml

$35.17

Light Socket Kit

The bulb is sold separately.

$97.31

Fresh Food Door Gasket

This misty beige door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$11.07

Spray Paint - 12 oz. - White

$61.59

Door Handle Kit

This kit includes both the refrigerator and freezer door handles. Screws NOT included.

$10.01

Egg Container

This part is used to hold eggs.

$6.60

Touch-up Paint - Black

16ml

$101.80

Freezer Door Gasket

This magnetic freezer door gasket seals the freezer door when closed and is misty beige in color.

$92.16

Temperature Control Thermostat Kit

This part keeps the refrigerator at a constant temperature.

$8.45

Insert Kit

This kit comes with two pieces.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drawers were cracked, trim had fallen off.

  • Customer: Julie from Oak Park, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 55 of 67 people found this instruction helpful
No need for tools. read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 67 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS, MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 48 of 55 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more