Models > 3ET21DKXDW02

3ET21DKXDW02 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 3ET21DKXDW02

If you know the refrigerator repair part you need, you can browse the list of all parts on the 3ET21DKXDW02, or you can search by name or part description. You can also find your part by where it is located on the 3ET21DKXDW02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 3ET21DKXDW02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$53.82

Crisper Pan

$6.98

Light Rocker Switch

$7.41

Door Shelf End Cap - Left or Right Side

Sold Individually.

$51.29

Meat Drawer

Sold individually.

$28.68

Door Shelf Bin

This part may differ in color, but is functionally the same. It's no longer available in clear.

$32.17

Door Shelf Retainer Bar

$4.65

Touch-Up Paint - White

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$61.37

Crisper Cover Frame

This is just the frame. The glass is sold separately.

$13.59

Front Roller

This front roller used on refrigerators is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 41 of 49 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 23 of 27 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more

Right front wheel broke

  • Customer: Tony from Chicago IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 14 of 17 people found this instruction helpful
Definatly a two man job. I suggest you put a pad down to protect your floor. Remove the filter, grill, and bolts per instructions. Everything is straight forward. Move the frame back 1/2 to 1 inch then tilt the frig back on it's side about 4 inches. If the frame doesn't drop down, move it back until the front of the frame comes of the front lip of the f... read more