Models > 3ET18ZKXDW02

3ET18ZKXDW02 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for 3ET18ZKXDW02

If you know the refrigerator repair part you need, you can browse the list of all parts on the 3ET18ZKXDW02, or you can search by name or part description. You can also find your part by where it is located on the 3ET18ZKXDW02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 3ET18ZKXDW02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.96

End Cap Trim Piece

$8.37

Light Rocker Switch

$13.81

Crisper Drawer Rail

$8.32

Door Shelf End Cap - Left or Right Side

Sold Individually.

$5.54

Touch-Up Paint - White

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$60.00

Crisper Drawer

This part is located at the bottom of the refrigerator.

$2.70

SCREW

Sold individually.

$7.38

Refrigerator Shelf End Cap - White

$4.06

End Cap Trim - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 34 of 41 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 19 of 22 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more

Missing center track for crisper drawers

  • Customer: JR from Portland OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 18 of 19 people found this instruction helpful
Remove the glass shelf and the support frame. Bend the front clip on the track back far enough to fit into slot on frame. Insert the back end of the track into the opening at the back of the frame. Press the front end of the track into the retainer slot in the frame. Reinstall the frame and glass shelf. Done. read more